Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Low-frequency radiated noise, characterized by a distinctive "acoustic fingerprint" is generated when vibrations from marine machinery propagate through a ship's hull into the ocean. This type of noise travels long distances with concentrated and stable energy, posing a significant threat to a ship's acoustic stealth capabilities. Active-passive hybrid isolation is the primary method for reducing low-frequency radiated noise from ships; however, technical challenges remain, such as effectively integrating active and passive components, achieving high output force in a compact design, and addressing the poor linearity of actuator output at low frequencies. To address these issues, this paper presented an innovative electromagnetic-hydraulic-rubber integrated vibration isolator. Firstly, the study analyzed the dynamic characteristics of a two-degree-of-freedom isolation system and investigated the influence of active-passive hybrid vibration isolator parameters on control force and vibration reduction performance. Secondly, it was established that the magnetic circuit model and magnetic field strength expressions for the electromagnetic actuator using magnetic circuit analysis derive the analytical relationship between electromagnetic force, current amplitude, and frequency using the energy method. Subsequently, a mathematical model was developed for the rubber-hydraulic suspension component to examine its dynamic characteristics, hydraulic damping, and hydraulic force amplification transmission laws. Lastly, we organically combine the electromagnetic actuator with the rubber-hydraulic suspension and conduct a multi-physics joint simulation of the integrated vibration isolator using Comsol software to verify the effectiveness of the optimized design and vibration isolation control. Experimental research was carried out on the dynamic characteristics, output force properties, and fatigue characteristics of the integrated vibration isolator prototype. Results indicated that the established models and methods can achieve over 90% accuracy in predicting the performance of the electromagnetic actuator's output force and exhibit good linearity within the 5–400 Hz range. The rubber-hydraulic suspension can achieve an amplification factor of up to 1.5 for the electromagnetic force while reducing the transmission of vibrations to the base. The research findings can enhance the low-frequency vibration isolation performance of marine machinery equipment and improve their acoustic stealth capabilities.

Active Isolation of Periodic Vibration From Motor to Flexible Receiver

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Design of an Active Vibration Isolation Control Strategy Based on IFT Method

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment

An Active Vibration Isolation Control Method under Excitation of Multi-Line Spectra

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Experimental study of active isolation control based on magnetic suspension isolator

Vibration Suppression for Magnetically Levitated High-Speed Motors Based on Polarity Switching Tracking Filter and Disturbance Observer

Matching Design of Active Magnetic Bearing and Elastic Support Vibration Isolator

Design and experiment of electromagnetic-hydraulic-rubber integrated vibration isolator

Two-Degree-of-Freedom Control for Active Magnetic Bearing Flywheel Rotor System Based on Inverse System Decoupling

Self-optimizing feed-forward control of electromagnetic suspension vibration isolator

Simulation and experiment on active vibration isolation with an adaptive method

Active Maglev Vibration Isolator System Based on Adaptive Sliding Mode Control

Semi-active control of the electromagnetic negative stiffness mechanism in a double-layer vibration isolator

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Active Vibration Isolation Platform with Eight Pneumatic Actuators

New bell plate controlled multi-inertia channel magnetorheological fluid mount wide frequency vibration isolation control study