Abstract:The stress–strain curves of two nonoriented electrical steels are simulated using common constitutive models and the results are compared to those from machine learning. None of the examined constitutive models can precisely predict the stress–strain behaviors under all the experimental conditions. The deepneuralnetwork based model can perfectly predict the flow stresses at almost all temperatures, strain rates, and strains. Hot rolling is a critical thermomechanical processing step for nonoriented electrical steel (NOES) to achieve optimal mechanical and magnetic properties. Depending on the silicon and carbon contents, the electrical steel may or may not undergo austenite–ferrite phase transformation during hot rolling, which requires different process controls as the austenite and ferrite show different flow stresses at high temperatures. Herein, the high‐temperature flow behaviors of two nonoriented electrical steels with silicon contents of 1.3 and 3.2 wt% are investigated through hot compression tests. The hot deformation temperature is varied from 850 to 1050 °C, and the strain rate is differentiated from 0.01 to 1.0 s−1. The measured stress‐strain data are fitted using various constitutive models (combined with optimization techniques), namely, Johnson–Cook, modified Johnson–Cook, Zener–Hollomon, Hensel–Spittel, modified Hensel–Spittel, and modified Zerilli–Armstrong. The results are also compared with a model based on deep neural network (DNN). It is shown that the Hensel–Spittel model results in the smallest average absolute relative error among all the constitutive models, and the DNN model can perfectly track almost all the experimental flow stresses over the entire ranges of temperature, strain rate, and strain.

High Temperature Flow Stress of Fe-3.0%Si-0.09%Nb Oriented Silicon Steel

Deformation behaviors of non-oriented silicon steel plate in hot rolling process

The flow behavior of homogenizated Al-Mg-Si-La aluminum alloy during hot deformation

Constitutive Analysis on High-Temperature Flow Behavior of 3Cr-1Si-1ni Ultra-High Strength Steel for Modeling of Flow Stress

Flow Behavior and Constitutive Equation of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si Titanium Alloy

High Temperature Deformation Characteristics of an Alumina‐Forming Stainless Steel

Flow Stress Models for 40Cr10Si2Mo Steel and Their Application in Numerical Simulation of Hot Forming

Strain Compensation of the Constitutive Equation for High Temperature Flow Stress of a Al-Cu-Li Alloy

Constitutive Modeling and Dynamic Softening Mechanism During Hot Deformation of an Ultra-Pure 17%cr Ferritic Stainless Steel Stabilized with Nb

On temperature and strain-rate dependence of flow serration in HfNbTaTiZr high-entropy alloy

Hot Deformation Behavior of Free-Al 2.43 wt.% Si Electrical Steel Strip Produced by Twin-Roll Strip Casting and Its Effect on Microstructure and Texture

Constitutive Relationship of Ti-1023 Alloy during Isothermal Forging Processes

Characteristic flow behaviour prediction and microstructure analysis of a commercial Si–Cr micro-alloyed spring steel under isothermal compression

Experimental and Physical-Based Constitutive Model Study of Fcc Metal over Wide Temperature and Strain Rate Ranges

A Flow Stress Model of 300M Steel for Isothermal Tension

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

Study on Hot Deformation Behavior of an Ultra Purified 21%cr Ferritic Stainless Steel

Constitutive Modeling of High‐Temperature Deformation Behavior of Nonoriented Electrical Steels as Compared to Machine Learning

Exploring the hot deformation behavior of novel Si-containing austenitic stainless steel

Modeling of Dynamic Recrystallization and Flow Stress of Nb‐Bearing Steels

Inverse Identification Method for Determining Stress–strain Curves of Sheet Metals at High Temperatures