Abstract:Self-utilization of compression waste heat has been proposed for the energy saving of gas compression process, in which the low-grade compression waste heat is recovered to generate cooling capacity in situ to cool the inlet gases of each stage compressor through thermally-driven refrigeration cycles. Efficiency enhancement of the gas compression process is achieved, since the actual compression process in this manner gets closer to an ideal isothermal compression process. However, the performance limits remain unclear due to the lack of consensus on internal coupling mechanism in the literature. Based on the theory of gas compression and thermo-power con-version, a thermodynamic model under ideal conditions is established by sequential Carnot cycles to analyze the performance limit of enhanced gas compression processes for a 60,000-Nm3/h scale air separation unit. The effects of key factors including cooling capacity distribution, number of compression stages, and ambient tem-perature on the energy conservation are further analyzed. The results show that when the ambient temperature is 25 celcius, the ideal energy saving rate of the three-stage self-enhancement system can reach 7.4%. The boundary maps of the performance improvement of the gas compression systems are given for reference in practice. In addition, a parametric analysis is carried out extending to the general compression systems. The results show that the single-stage pressure ratio, adiabatic index and isentropic efficiency of compressors, which directly affect the grade of waste heat, are the most critical factors affecting the performance of the self-enhancement system, while the distribution of cooling capacity has little effect. This study proves the superiority of this emerging improvement measure over traditional exothermic compression and multistage compression with effective interstage cooling, along with guidance for estimating energy saving potential under different conditions and in different applications.

THE ENERGY CONSUMPTION ANALYSIS AND STUDY OF AN INTERNAL COMPRESSION PROCESS AIR SEPARATION EQUIPMENT

Energy-saving Technology and Experimental Research of Reciprocating Compressor

Research on Distillation and Heat Exchange of the Internal Compression Air Separation Plant

Modeling, Characteristic Analysis, and Optimization of Ideal Internal Thermally Coupled Air Separation Columns

Technical-economic evaluation of an energy-integrated temperature swing adsorption process for compressed air drying

Energy optimization analysis of internal thermally coupled air separation columns

Energy Saving Opportunities in an Air Separation Process

Research Status of Compressed Air System Energy Saving Technology

Analysis on energy and resource consumption in producing process of compression-type water chillers

An example analysis of energy-saving improvement based on air compressor inlet pre-treatment

Compression Heat Self-Utilisation Systems with Cascade Deep Dehumidification for Industrial Compressor Energy Saving

Numerical Analysis of the Energy Saving Improvement for Compressor

Performance Limit of Gas Compression Processes Enhanced by Self-Utilization of Compression Waste Heat

Thermo-Economic Assessments of a Novel Integrated Compressed Air Energy Storage System

Overview of Researches on Energy-saving for Air Compression Stations

Development of gas pressurized composite air-conditioning unit and annual operation energy efficiency analysis

Experimental Analysis on Domestic Air-conditioning Condense Heat Recovery Hot Water Supply System

Research and Development of Large-Scale Cryogenic Air Separation in China

A Parametric Sensitivity Study and Comparison Analysis on Multiple Air Separation Processes

Air conditioning system of cigarette factories and energy saving research

Comprehensive thermo-exploration of a near-isothermal compressed air energy storage system with a pre-compressing process and heat pump discharging