Abstract:Acoustic emission (AE) and particle flow code (PFC 3D ) are utilized to characterize microcracking nature in mode-I fracture of coal with strong bursting liability. The microcracks are represented by AE moment tensor (MT), which corresponds to displacement discontinuities involving opening/closing and sliding motions. The microcracking source parameters, including shear/tensile type, volume, orientation, motion, and magnitude, are calculated by minimizing the errors between the analytical and measured displacements, with an imposed constraint. Then, the detailed fracture processes, including microcracking source mechanisms and energy dissipation during coal tensile failure, are analyzed using both experimental and numerical approaches. The results show that the time-varying of crack mode angle and decomposed crack volume suggest a mixed-mode mechanisms locally with both normal and tangential displacements for microcracks. However, the orientations of microcracks with bigger magnitude are almost parallel to the direction of the crack propagation path, and their movement directions are mainly along the direction of the maximum principal stress, which is compatible with the expected fracture mechanism of mode-I opening globally. The dissipated energy and crack opening displacement obtained from AE inversion are approximately consistent with results calculated from energy release rate G and opening displacement measured using DIC, respectively. A new AE MT simulation method, based on particle motion, is developed using PFC 3D to verify the reliability of the above-mentioned microcracking characterization results. The mechanical properties as well as AE responses (including AE rate, magnitude distribution, spatial location, and MT) from PFC 3D numerical simulation are in good agreement with the experimental results, which reinforces the reliability the microcracking characterization results from AE inversion and simulation. Due to the tortuous crack propagation path and the inhomogeneity between grains, the maximum principal stress and resultant displacement coexists both on the normal and tangential of the inclined crack surface. Under the combined action of tensile and shear stress, the normal and tangential motion displacement components along the crack plane are generated, respectively, resulting in mixed-mode microcrack. This research provides a new approach for characterizing the microcracks in loaded rock/coal, which can deepen the understanding of meso-process and mechanism during rock/coal fracture.

Experiment of Coal and Rock fissure Cracking and Developing Characteristic under Uniaxial Compression Condition

Experiment of crack evolution and acoustic emission in the process of coal containing gas failure

Study of Deformation-damage and Acoustic Emission Character of Coalrock under Uniaxial Compression

Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression

The failure behavior of coal-rock combined body under compression-shear loading

Uniaxial Compression CT and Acoustic Emission Test on the Coal Crack Propagation Destruction Process

Experimental Study on the Failure Mechanism of Layer‐crack Structure

Cracking Process and Stress Field Evolution in Specimen Containing Combined Flaw Under Uniaxial Compression

Experimental Research on the Mechanical Characteristics and the Failure Mechanism of Coal-Rock Composite under Uniaxial Load

Acoustic Emission, Damage and Cracking Evolution of Intact Coal under Compressive Loads: Experimental and Discrete Element Modelling

Failure Mechanism and Acoustic Emission Characteristics of Rock Specimen with Edge Crack under Uniaxial Compression

Failure Characterization of Three Typical Coal-Bearing Formation Rocks Using Acoustic Emission Monitoring and X-ray Computed Tomography Techniques

An experimental study on failure mechanical behavior and cracking mechanism of rectangular solid sandstone containing two non-coplanar fissures under conventional triaxial compression

Experimental Study on Mechanical Properties, Acoustic Emission Energies and Failure Modes of Pre-cracked Rock Materials under Uniaxial Compression

Microcrack monitoring and fracture evolution of coal and rock using integrated acoustic emission and digital image correlation techniques

Mechanical properties and acoustic emission characteristics of coal samples with different fissure angle

Microcracking Characterization in Tensile Failure of Hard Coal: An Experimental and Numerical Approach

Characteristics of Fractal and Percolation of Rocks Subjected to Uniaxial Compression During Their Failure Process

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

Research on Damage and Acoustic Emission Properties of Rock under Uniaxial Compression

Crack propagation process and acoustic emission characteristics of rock-like specimens with double parallel flaws under uniaxial compression