Abstract:Xanthan gum (XG) was widely used as an oilfield chemical treatment agent because of its environmental protection and diverse functions. With the increased drilling depth and formation complexity, the shortcomings such as poor solubility and low resistance to temperature were gradually exposed. In this study, a modified XG derivative XG-g-AAA was synthesized by grafting XG with acrylic acid (AA), acrylamide (AM), and 2-acrylamido-2-methylpropane sulfonic acid (AMPS). The chemical structure of XG-g-AAA was determined by Fourier transform infrared spectroscopy and nuclear magnetic resonance (1H NMR). Then, the solubility, high-temperature rheology and filtration properties, resistance to Na+/Ca2+, and compatibility were investigated. Results show that (1) both in aqueous and salt solutions, XG-g-AAA can completely be dissolved within 15 min. The significant improvement of the solubility of XG-g-AAA makes it more suitable for field use. (2) XG-g-AAA is less sensitive to high temperatures, and the viscosity decay decreased by 23.3 and 21.3% than XG at 150 and 180 °C, respectively. XG-g-AAA-based drilling fluid is a high-quality drilling fluid with significant shear thinning behavior, and the power-law model is the optimal model to describe its high-temperature rheology. Within 150 °C, 1.5% XG-g-AAA can maintain a reasonable value of the flow behavior index (n) (0.55–0.69), filtration volume (<11.6 mL), and sufficient gel strength (GS). At 150–200 °C, 3% XG-g-AAA is recommended. The value of n was in the range of 0.45–0.62, and the fluid loss was within 10 mL. However, 3% XG-g-AAA cannot provide enough GS at 200 °C; thus, a shear strength-improving agent is recommended to be added. (3) XG-g-AAA showed excellent contamination tolerance and compatibility. It could resist 2 wt % CaCl2 and 35 wt % NaCl at room temperature and 0.75% CaCl2 and 5% NaCl after 150 °C aging. (4) XG-g-AAA showed compatibility with sulfonated drilling fluids and could replace commercial fluid loss agents in the formula. Furthermore, the high-temperature fluid loss control mechanism was discussed by analyzing the effects of XG-g-AAA on the bentonite layer spacing, particle size distribution, stability of the colloidal system, and mud cakes.This article has not yet been cited by other publications.

Temperature Resistance and Shear Resistance of Xanthan Gum and Its Derivatives

Effective Modified Xanthan Gum Fluid Loss Agent for High-Temperature Water-Based Drilling Fluid and the Filtration Control Mechanism

Temperature/salt tolerance and oil recovery of xanthan gum solution enhanced by surface-modified nanosilicas

Viscosity Reduction Mechanism in High Temperature of a Gemini Viscoelastic Surfactant (VES) Fracturing Fluid and Effect of Counter-Ion Salt (kcl) on Its Heat Resistance

Host-guest strategy improves rheological properties, conformational stability and oil displacement efficiency of xanthan gum

Structural, rheological and functional properties of ultrasonic treated xanthan gums

Thermal and Rheological Performances Evaluation of a Modified Biopolymer for Fracturing Fluid System

Modified guanidine gel fracturing fluid system and performance optimization for ultra-deep and ultra-high temperature oil and gas reservoirs

Effect of shear rate, temperature, and salts on the viscosity and viscoelasticity of semi‐dilute and entangled xanthan gum

Preparation and Properties of Temperature Resistant and Salt Resistant Lotion Fracturing Fluid Thickener

Evidence from Thermal Aging Indicating That the Synergistic Effect of Glyoxal and Sodium Sulfite Improved the Thermal Stability of Conformational Modified Xanthan Gum

Modification of Xanthan Gum for a High-Temperature and High-Salinity Reservoir

Study of Fracturing Fluid on Gel Breaking Performance and Damage to fracture conductivity

Rheological Performance of High-Temperature-Resistant, Salt-Resistant Fracturing Fluid Gel Based on Organic-Zirconium-Crosslinked HPAM

Development of gelled acid system in high-temperature carbonate reservoirs

Effect of high reservoir pressure on rheological properties of branched xanthan gum and polymer flooding behavior in porous media

Effects of ultrasonic intensity and time on rheological properties of different concentrations of xanthan gum solution

The ' main + auxiliary ' synergistic strategy for constructing binary polyacrylamide-based ultra-high temperature fracturing fluid

Rheological Behavior of Hydrate Slurry with Xanthan Gum and Carboxmethylcellulose under High Shear Rate Conditions

Development and Gelation Mechanism of Ultra-High-Temperature-Resistant Polymer Gel

Synthesis and Mechanism Study of Temperature- and Salt-Resistant Amphoteric Polyacrylamide with MAPTAC and DTAB as Monomers