Abstract:Rotating bending fatigue tests, together with microstructural characterization, have been performed on the high nitrogen martensite bearing steel Cronidur30. The results show that the fatigue stress amplitude gradually de-creases with the increasing number of fatigue cycles, with a fatigue strength limit of 867 MPa after 1.0 x 107fatigue cycles. Crack sources due to both inclusions and twin-martensite volumes are found from inspection of fracture surfaces, with nearly 40% of the fatigue failures identified as originating from twin-martensite volumes. Based on a detailed microstructural examination, it is concluded that twin-martensite volumes first fracture locally along the maximum shear stress direction, and these locations then act as the sources for crack propa-gation and finally resulting in fatigue failure. The stress intensity factors calculation of two types of crack sources initiated by the subsurface shows that the two types of crack sources play basically the same role in fatigue crack initiation. Granular bright facet (GBF) will be formed around the crack source to meet the threshold value of crack propagation. When the initial size of these two crack sources is large enough, the crack can directly propagate without forming GBF. The novel observation of twin-martensite induced crack nucleation highlights the fact that fatigue failures of the investigated bearing steel do not only originate from inclusions, and help to provide an in-depth understanding on the fatigue mechanisms of bearing steels.

Bending fatigue crack initiation and propagation behaviors of a nickel free high nitrogen stainless steel

In-situ Observation of Crack Initiation and Propagation in Ni-based Superalloy with Film Cooling Holes During Tensile Test

Fracture Behavior of 9% Nickel High-Strength Steel at Various Temperatures Part I. Tensile Tests

Fracture behaviour of 8%Ni 980 MPa high strength steel at various temperatures Part 3 - Four-point notched bend tests

Fatigue Crack Initiation and Propagation Behavior of Nickel-Based Single Crystal DD6 under Different Drilling Processes

Plastic Deformation and Fracture Behaviour of High-Nitrogen Nickel-Free Austenitic Stainless Steel

Investigation on Microstructure Evolution and Fracture Morphology of Single Crystal Nickel-Base Superalloys under Creep-Fatigue Interaction Loading

Low Cycle Fatigue Behavior and Crack Initiation Mechanism of Ni-based Single Crystal Curved Thin-Walled Blade Simulator Specimen with Film Cooling Holes

Characterization on Crack Initiation and Early Propagation Region of Nickel-Based Alloys in Very High Cycle Fatigue

Transient Thermal Fatigue Crack Propagation Behavior of a Nickel-Based Single-Crystal Superalloy

Crack Initiation Induced by Twin-Martensite and Inclusion in Rotatory Bending Fatigue of a High Nitrogen Martensite Bearing Steel

Effect of Stress Ratio on the Fatigue Crack Propagation Behavior of the Nickel-based GH4169 Alloy

Mechanical Properties of a Novel High Nitrogen and Low Nickel Stainless Steel S35657

Deformation behavior at fatigue crack tip in nickel-based alloy

Multi‐scale Fatigue Crack Propagation in 304 Stainless Steel: Experiments and Modelling

Fatigue crack nucleation behavior in nickel-based PM alloy

LOW CYCLE FATIGUE FRACTURE FOR 316ti STAINLESS STEEL IN HIGH TEMPERATURE AND PRESSURE WATER

Fatigue crack initiation and competitive crack propagation behavior in 500 MPa grade automobile beam steel

Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime

Fretting fatigue damage mechanism of Nickel-based single crystal superalloys at high temperature

The Influence of Temperature and Orientation on Fatigue Crack Growth Behavior of a Directional Solidification Nickel-Based Superalloy: Experimental Investigation and Modelling