Abstract:Ti–6Cr–5Mo–5V–4Al (Ti-6554) alloy has wide applications for large load-bearing components in the aerospace field. However, during the hot forming process of the alloy in the α+β phase region, there are a variety of interaction and restriction softening mechanisms and complex texture evolution behaviors, which jointly affect the microstructure and mechanical properties. This paper systematically studies the softening mechanism and texture evolution of Ti-6554 alloy in the α+β phase region using electron backscatter diffraction (EBSD), including dynamic phase transformation (DPT) and dynamic spheroidization of α phase and dynamic recrystallization (DRX) of β phase. Firstly, the effect of deformation parameters on the DPT is studied, and it is found that the volume fraction of α phase declines gradually with raising the strain rate, deformation temperature and deformation amount. The yield stress and the driving force for DPT increase with raising the strain rate and decreasing the deformation temperature. The equiaxed α phase will gradually transform into the lamellar α phase during the spheroidization process, accompanied by the wedging of the β phase. The combined effect of DPT and dynamic spheroidization leads to α grain refinement. Furthermore, the effect of deformation parameters on the DRX process of β phase is also investigated. The DRX degree only increases gradually with increasing the strain. Increasing the deformation temperature and decreasing the strain rate do not significantly increase the DRX volume fraction. Meantime, the DRX process of the β phase is heavily dependent on the α phase. The higher proportion of the α phase is capable of promoting continuous dynamic recrystallization (CDRX) process of β phase, while the lower proportion of the α phase will promote the transformation of CDRX into dynamic recrystallization (DDRX), but can not effectively increase the DRX degree of β phase. Further, the texture evolution shows that due to the combined effect of DPT and dynamic spheroidization, the effect of deformation parameters on the texture strength of α phase is very complicated. For the β phase, and fiber textures are easily formed during the deformation process.

Research progress of dynamic phase transformation behavior of titanium alloy under thermo-mechanical coupling process

Dynamic recrystallization of Ti-6Al-4V titanium alloy based on cellular automata

The interplay relationship between phase transformation and deformation behavior during hot compression in a metastable β titanium alloy

Hot deformation behavior and microstructure evolution of TC11 dual-phase titanium alloy

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

Dynamic mechanical behavior, microstructure evolution, and restoration mechanism of a β‐Ti alloy during hot compression deformation

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

The Influence of Thermomechanical Processing on Microstructural Evolution of Ti600 Titanium Alloy

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

Influence of stress-induced α’’ phase transformation on mechanical properties in metastable β type Ti-5Al-2.5Cr-5Mo-1Sn alloy

Effect of deformation and cooling on non-equilibrium microstructure evolution and phase-transition mechanism of Ti–6Al-2.5Mo-1.5Cr-0.5Fe-0.3Si

Systematic analysis of the softening mechanism and texture evolution of Ti–6Cr–5Mo–5V–4Al alloy during hot compression in α+β phase region

Deciphering the microstructural evolution and adiabatic shearing behavior of the titanium alloy with stress-induced ω phase transformation during dynamic compression

Effect of thermo-mechanical processing on microstructure and mechanical properties of near α titanium alloys

Effect of Heating on Hot Deformation and Microstructural Evolution of Ti-6Al-4V Titanium Alloy

Post-dynamic transformation from α to β phase and reverse transformation in Ti-10V-2Fe-3Al alloy during interrupted hot deformation

Deformation Behaviour and Microstructural Evolution During the Hot Compression of Ti-5Al4Zr8Mo7V Alloy

Recent progress in the simulation of microstructure evolution in titanium alloys

Analysing the Interaction between Microscopic Deformation, Microstructure and Void Evolution of Near-α Titanium Alloys during Non-Superplastic Hot Deformation by an Integrated Crystal Plasticity Finite Element Model

Research Progress on Composition Design, Deformation Mechanism and Mechanical Properties of Metastable Titanium Alloy

Evolution of the α phase and microhardness for hot isostatic pressed Ti-6Al-4V alloy during multi-pass deformation