Abstract:This article introduces an efficient decomposition process that uses sodium carbonate (Na2CO3) and activated carbon (C) as additives to decompose Bayan Obo mixed rare earth concentrate (hereinafter to be referred to as RE concentrate) by nonoxidative microwave radiation roasting. The roasting temperature, holding time, and contents of Na2CO3 and activated carbon are investigated. The optimum process parameters for decomposition are 800 °C and 30 min. The ratio of m(Na2CO3)/m(RE concentrate) is 0.5, and the ratio of m(C)/m (ER concentrate and Na2CO3) is 0.2 based on experimental data. Under the above conditions, the decomposition rate (shortened to DR) of RE concentrate is 98.58%, and the removal rates (shortened to CRs) of fluorine (F) and phosphorus (P) reached 80.35 and 46.75%, respectively. These rates are higher than traditional oxidation roasting under the same conditions. The three reasons for the result are the unique microwave heating characteristics, the overall efficient reaction of the mixture (RE concentrate, Na2CO3, and activated carbon), and the high nonoxidation rate of cerium. For these reasons and large experimental data, the reaction rate of the mixture is improved, and the efficiency of dilute hydrochloric acid for leaching rare earth elements is enhanced. In this article, the valence of rare earth elements in the roasted ore is all in the form of trivalence. Importantly, this nonoxidative roasted product can avoid the generation of chlorine in hydrochloric acid leaching. Moreover, such a short holding time is scarce in traditional roasting. When the mixture was roasted by utilizing microwave heating, the sinter phenomenon of the roasted product was avoided at high-temperature roasting. Finally, the surface morphology of RE concentrate at different conditions was observed by scanning electron microscopy (SEM) analysis, which can be used to compare the specific differences of roasting methods. According to these results, this process is beneficial for the decomposition of RE concentrate in terms of Na2CO3 roasting and is helpful for improving the clean and green technology method of hydrometallurgy.

Re-oxidation Mechanism of Chromite Roasting in Late Stages

Extraction, phase transformation and kinetics of valuable metals from nickel-chromium mixed metal oxidized ore

Processing of Chromite Overburden by Soda Roasting to Recover Chromium as Sodium Chromate

Synergetic Utilization of Zinc-Bearing Dust by Carbothermic Reduction-Roasting Process: Phase Transformation and Morphological Evolution

Sufficient extraction of Cr from chromium ore processing residue (COPR) by selective Mg removal

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Mechanism of the Direct Reduction of Chromite Process as a Clean Ferrochrome Technology

Preparation of chromium oxide by hydrothermal reduction of sodium chromate aqueous solution with hydrogen and application to chromite ore processing

Dissolution behavior of chromite ore in CaO‐SiO2 system

Effect Of Roasting Temperature On Phase Transformation In Co-Reduction Roasting Of Nickel Slag

Cyanide detoxification and iron mineral recycle of cyanide tailings by the sustainable utilization technology of oxidation-reduction roasting: Process optimization and mechanism study

Thermal roasting behavior and kinetics of African cobalt-rich copper sulfide ore in air atmosphere

Leaching of Valuable Elements from the Waste Chromite Ore Processing Residue: A Kinetic Analysis

Decomposition Process of Nonoxidative Microwave Radiation Roasting of a Mixed Rare Earth Concentrate with Sodium Carbonate

Green one-step roasting method for efficient extraction of vanadium and chromium from vanadium-chromium slag

Non-salt roasting mechanism of V–Cr slag toward efficient selective extraction of vanadium

Behavior of chromium in the reduction and smelting of high alumina nickel laterite in blast furnace

Enrichment Characteristics of Cr in Chromium Slag after Pre-Reduction and Melting/Magnetic Separation Treatment

Recovery and kinetics of gold and iron from cyanide tailings by one-step chlorination–reduction roasting

Effect of Na 2 CO 3 and CaCO 3 on coreduction roasting of blast furnace dust and high-phosphorus oolitic hematite

The Direct Alloying of Steel through Silicothermic Self-Reduction of Chromite Ore Utilizing Si-Containing Solid Waste