Abstract:PurposeThe purpose of this paper is to present a control system for a heavy duty industrial robot, including both the control structure and algorithm, which was designed and tested.Design/methodology/approachAn industrial PC with TwinCAT real‐time system is chosen as the motion control unit; EtherCAT is used for command transmission. The whole system has a decoupled and centralized control structure. A novel optimal motion generation algorithm based on modified cubic spline interpolation is illustrated. The execution time and work were chosen as the objective function. The constraints are the limits of torque, velocity and jerk. The motion commands were smooth enough throughout the execution period. By using the Lagangue equation and assumed modes methods, a dynamic model of heavy duty industrial robots is built considering the elastic of both joints and links. After that a compound control algorithm based on singular perturbation theory was designed for the servo control loop.FindingsThe final experimental results showed that the control commands and algorithms could easily be calculated and transmitted in one sample unit. Both the motion generation and servo control algorithm greatly improved the control performance of the robot.Research limitations/implicationsAll parts of the control algorithm can be computed on‐line except the optimal motion generation part. The motion generation part is time consuming (about 2.5 seconds), which can only be performed off‐line. Hence future work will focus on improving the efficiency of this algorithm; therefore it could be performed online, increasing the robot's overall robustness and adaptability.Originality/valueAiming at the internal and external causes that limit the dynamic performance of heavy duty industrial robots, this paper proposes a realizable scheme of control system and includes both the control structure and algorithms. A novel optimal motion generation algorithm is presented.

The Design of a Real-Time Industry Robot Controller Based on EtherCAT

Design of Motion Control System Based on EtherCAT

Design of Controller System for Industrial Robot Based on RTOS Xenomai

Multi-tasking Syetem Design for Multi-axis Synchronous Control of Robot Based on RTOS

Develop Real-Time Robot Control Architecture Using Robot Operating System and EtherCAT

A Real-Time Walking Robot Control System Based on Linux Rtai

Research on the Real-Time Module of the Industrial Robot Control System Based on the RTAI

Research on an opened controller for a 4-DOF industrial robot

Design of the 4-DOF Parallel Robot Control System Based on EtherCAT

Design of real-time control software with LabWindows/CVI and RTX

A Control System Design for 7-Dof Light-weight Robot Based on EtherCAT Bus

Design of industrial robot controller based on SERCOS-Ⅲ

Control system design of 6-DOFs serial manipulator based on real-time ethernet

Research on Configurable Modular Motion Control System of Industrial Robot

Control System Design for High Payload Industrial Robot Via High Speed Communication Bus and Real-Time System

Multi-Dof Motion Control System Design and Realization Based on Ethercat

Study on open and real-time performance ofindustry robot control system

Realization of EOD Robot Embedded Control System Based on PC/104

Control System Design for Heavy Duty Industrial Robot

A Real-time Robot Control Framework Using ROS Control for 7-Dof Light-weight Robot

Design and Application of a Real-Time Industrial Ethernet Protocol under Linux Using RTAI