Multi-objective optimization on the parameters of variable laser spot for the SL printing with a new path planning algorithm
Xiaofeng Guo,Siqing Li,Yingzhao Guan,Haobing Zhou,Lujun Cui,Jianpu Xi,Minghui Gu
DOI: https://doi.org/10.1007/s12206-024-1137-2
IF: 1.81
2024-12-06
Journal of Mechanical Science and Technology
Abstract:Laser path planning is one of the important technologies in stereolithography (SL) Printing, which directly affects the pringting efficiency and quality. The traditional laser path planning methods usually employ a simple combination algorithm which uses small spot to scan outer skin and large spot for the internal filling region. It has been observed that the employing of traditional variable spot approach usually leads to poor printing quality or even printing failure when dealing with models featuring long-narrow or thin-walled characteristics. To address this problem, a new path planning algorithm of variable spots based on partition-combination method was proposed. In addition to that, aiming at the problems of time consuming, low efficiency and inadequate strength of the stereo lithography (SL), a neural network model of printing parameters is established, and an improved multi-objective particle swarm optimization algorithm is proposed to optimize the process parameters of the variable laser spot. The optimal process parameter combination is selected from Pareto set, and the optimized results are verified by experiments. The result shows that, compaired with the traditional laser path planning method, the surface accuracy and structural strength of the formed specimen are increased by 13.7 % and 13.4 % respectively with the new scanning algorithm and the optimized process parameters. Thus, It can be concluded that, the new laser scanning algorithm and the optimization method for the variable laser spot which takes forming quality, structural strength and printing efficiency into account simultaneously, can help users to make the process parameters of laser spot quickly. The research can also provide a reference for other printing scenarios such as selective laser melting (SLM) printing etc.
engineering, mechanical