Abstract:High pressure gas quenching has the advantages of pure convective heat transfer, high levels of control, avoidance of cleaning the quenched parts and low environmental impact. However, typical gas quenching facilities exhibit inhomogeneous flow conditions through the quench load and the parts, resulting in scatter in final properties. The upstream flow profile of the load has been identified as a key factor determining local flow conditions and heat transfer. The intensity of the quenching process is determined by the pressure drop that results from the flow resistance of the quench load, although a significant part of the flow passes between the load and the chamber walls and does not contribute to the quenching process. A simulation of the flow inside a commercial high pressure gas quenching chamber was carried out, using a multiscale model to give faster convergence. An experimental analysis of the flow inside a model quenching chamber through velocity measurements and flow visualisation was also performed. Finally, a quenching run with cylindrical parts in a double-chamber vacuum furnace was used to validate the model results. Various upstream velocity profiles were applied to demonstrate their influence on the quenching result. The multiscale simulation approach and the results of the flow process investigation are reported. Guidelines for gas quenching process optimisation are outlined.

Numerical Simulation of Flow Field and Temperature Field in the Vacuum High Pressure Gas Quenching Furnace

Numerical Simulation of Gas Quenching Process of Workpiece

Numerical Simulation of High Pressure Gas Quenching Process

Numerical simulation of high pressure gas quenching of H13 steel

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Coupled numerical simulation of flow field, temperature field, microstructure field and stress field on heat treatment process

3-D Numerical Simulation of Heat Transfer Process in Vacuum Heat Treatment Furnace

Numerical Simulation of a Retrofitted Quench Chamber of a Coal Gasifier

Combined CFD and Heat Treatment Simulation of High-Pressure Gas Quenching Process

Solving Heat Density of High Pressure Gas Quenching by Finite Volume Method (FVM)

Simulation of temperature field of sintering ignition furnace

NUMERICAL SIMULATION ON TURBULENT FLOW AND HEAT TRANSFER OF VERTICAL PIPE IN QUENCH CHAMBER OF COAL GASIFIER

Numerical simulation of temperature field during heating process in vacuum heat treatment furnace

Numerical simulation of cold flow field in quench ring of entrained-bed gasifier

Multi-field coupling simulation of vacuum carburizing and high-pressure gas quenching process

Numerical Simulation of Cavitation Flow under High Pressure and Temperature

Homogenisation of Heat Treatment Process in High Pressure Gas Quenching

Numerical simulation on temperature field during plasma arc surface quench based on ANSYS

The analysis of gas flow in the wind tunnel of high pressure gas quenching furnace

Attempts on the Numerical Simulation of Heat Treatment in Engineering Applications

Cfd -Based Modelling On Inter Facial Heat Transfer For Water Quenching