Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Initial Corrosion Behavior of Transmission Tower Materials in Ocean Atmosphere

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Investigation on Atmospheric Corrosion Behavior of Transmission Tower Materials in Simulated Industrial Environments

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Atmospheric Corrosion of Carbon Steels in Tropical and Subtropical Climates in Southern China

Study On Atmospheric Corrosion Behavior Of Q235 Galvanized Steel In Substation

Corrosion evolution of electric power equipment metal materials under industrial pollution environment with high heat and high humidity

Insight to atmosphere corrosion behavior of Q345NH steel in Wenchang tropical marine environment

Evolution of Corrosion Products of Carbon Steels and Galvanized Steel in Simulated Marine Atmosphere

Characterization of Corrosion Products Formed on Q235 Carbon Steel and T2 Copper in the Antarctic Atmosphere

Study of corrosion and failure mechanism of the galvanized steel pipes of meteorological tower serviced in the South China Sea

Corrosion Behavior and Corrosion Products of a Low-Alloy Weathering Steel in Qingdao and Wanning

Corrosion behaviors of container steel plates in tropical marine atmosphere environment

Research on Atmospheric Corrosion of 45# Steel in Low-Latitude Coastal Areas of China

Corrosion Behaviors and Mechanisms of New Weathering Steel and Carbon Steel in Simulated Industrial Atmosphere

Corrosion behavior of weathering steel in marine atmosphere

Corrosion and Inhibitory Mechanism of Producing Water from Tower One

Bearing Capacity Analysis of Transmission Tower Structure Considering Corrosion Damage

Characterization of the Corrosion Products Formed on Carbon Steel in Qinghai Salt Lake Atmosphere

Study of Short-Term Corrosion Behavior of Q345 Steel in Marine Atmospheric Environment

Atmospheric Corrosion State Evaluation Based on Surface Corrosion Morphology for Electrical Metal Frame Equipment in Chongqing Power Grid