Abstract:The low-alloy steel matrix composites locally reinforced with in situ TiC particulates have been successfully produced utilizing the self-propagating high-temperature synthesis (SHS) reaction of (Ti, Fe)-C systems during casting. Two types of TiC particulates synthesized by different mechanisms exhibit a relatively uniform distribution in the local reinforcing region. The large rectangular TiC particulates with an average size of similar to 2 mu m or more, which are formed by the nucleation-growth mechanism through the contact reaction process, are mainly present in the local reinforcing region of the composites fabricated by (28Ti, Fe)-C system and the matrix region nearby the interface between the steel matrix and reinforcing region. The fine spherical/near-spherical TiC particulates, which are synthesized by reaction, solution and precipitation mechanism during the SHS reaction, are mainly existent in the reinforcing region. Moreover, the average size of spherical/near-spherical TiC particulates increases from similar to 0.1 to similar to 0.5, and then to similar to 1 mu m with the increase in Ti content from 28 to 48, and then to 68wt% in (Ti, Fe) powders. The interfaces of the composites are clean, which results in a good metallurgical bonding between steel matrix and reinforcing region in the composites. Moreover, the micro-hardness and wear resistance of the local reinforcing region of the composites are significantly higher than those of the unreinforced steel matrix.

TiC Particulates Locally Reinforced Al-matrix Composites by High-temperature Melt Casting

In situ fabrication of TiC particulates locally reinforced aluminum matrix composites by self-propagating reaction during casting

Investigation of Al-matrix Composites Reinforced by TiC Particulates Synthesized from Melt and Corresponding Properties

In Situ TiC Ceramic Particles Locally Reinforced Al‐Si Matrix Composites Prepared by SHS‐Casting Method from the Al‐Si‐Ti‐C System

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Fabrication of Steel Matrix Composite Locally Reinforced with in Situ TiC Particulate Via SHS Reaction of (ti, Fe)–C System During Casting

In situ TiC particulates reinforced ferrous matrix composite and its microstructure forming mechanism

Microstructure and property of Al/TiC composites prepared by reaction synthesis

Microstructure and Compressive Properties Ofin SituSynthesized TiC/Ti Composites

Microstructure of in Situ TiC Particle Reinforced Titanium Alloy Matrix Composites

Fabrication of TiC Particles Dispersion-reinforced Aluminum Matrix Composite by In-situ Synthesis Technique

Preparation and Characterization of TiC Particulate Locally Reinforced Steel Matrix Composites from Cu–Ti–C System with Various C Particles

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

Microstructure of TiC particle reinforced titanium matrix composite

As-cast microstructures of Ti-11Al-xC alloys

Microstructure Evolution of Ti-Al-C System Composite

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

In Situ Technique for Synthesizing Multiple Ceramic Particulates Reinforced Titanium Matrix Composites (tib + TiC + Y2O3)/Ti

Lamellar Structure and Effect of Ti2AlC on Properties of Prepared In-Situ TiAl Matrix Composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

FORMING MECHANISM OF AS-CAST TiC MORPHOLOGY IN IN-SITU TICP/Ti-6Al COMPOSITE