Research on a novel non-uniform and asymmetric ultrasonic vibration system
Chongyang Zhao,Yizhuo Liu,Zhenzhou Wang,Jishan Han,Bo Zhao,Jinyuan Tang
DOI: https://doi.org/10.1088/1361-6501/ad7eea
IF: 2.398
2024-09-26
Measurement Science and Technology
Abstract:A new type of non-uniform and asymmetric ultrasonic vibration system is proposed and applied to the turning process. The research results show that the design theory of the non-uniform and non-symmetric ultrasonic vibration system is accurate and reliable.The theoretical design frequency and modal simulation frequency error of Ultrasonic Vibration Turning System (UVTS) is only 2.5%. The designed non-uniform and non-symmetric ultrasonic vibration system has excellent vibration performance and stability, and the established simulation model can predict surface microtexture accurately. The vibration mode output by the non-uniform and non-symmetric ultrasonic vibration system is longitudinal-bending vibration, and the actual vibration performance is excellent. Compared with conventional cutting, the addition of longitudinal-bending ultrasonic vibration under the same conditions can give the machined surface a microscopic textured structure, reduce surface roughness and water contact angle, and improve surface wettability.The minimum surface roughness obtained in the experiment is 1.005 μm.The orthogonal experiment results show that there is a correlation between the machining parameters, surface micro-structure parameters, surface wettability, and surface roughness.
engineering, multidisciplinary,instruments & instrumentation