Abstract:Surface Review and Letters, Ahead of Print. The aim of this study is to highlight the importance of optimizing machining parameters to improve the performance and surface integrity of Inconel-825 superalloy using the Electrical Discharge Turning (EDT) process, an important configuration of Electrical Discharge Machining (EDM). The study uses a Face-Centered Central Composite Design (FCCCD) to conduct experiments and applies the Response Surface Methodology (RSM) and multi-objective genetic algorithm (MOGA) to optimize input parameters. Various factors like Gap Current (Ig), pulse on time (Ton), rotational speed (N), and Magnetic field assistance (B) are adjusted at different levels, while outcomes such as Material Removal Rate (MRR), Tool Wear Rate (TWR), Overcut (OC), and Surface Roughness (Ra) are measured. Analysis of Variance (ANOVA) is used to understand the impact of each input factor on the outcomes. The results demonstrate that both RSM and MOGA provide accurate predictions closely aligned with experimental results, with MOGA showing a slight advantage in predicting tool wear and surface roughness. Specifically, the RSM solution achieved a desirability of 0.693 with parameters Ig at 8 A, Ton at 48.082[math][math]s, speed at 1399.988[math]RPM, and magnetic field at 0.3[math]T, achieving MRR of 5.182[math]mg/min, TWR of 3.138[math]mg/min, OC of 166.716[math][math]m, and Ra of 2.047[math][math]m. The MOGA solution featured parameters Ig at 8.045 A, Ton at 48.557[math][math]s, speed at 1360.3 RPM, and magnetic field at 0.3[math]T, yielding an MRR of 5.169[math]mg/min, TWR of 2.983[math]mg/min, OC of 170.037[math][math]m, and Ra of 2.060[math][math]m. SEM analysis confirmed improved surface quality under optimized conditions, while XRD analysis showed significant grain refinement and increased dislocation density.

Combined Machining of Inconel 718 by Super High Efficient EDM Milling and Arc Machining

Machining performance of inconel 718 using high current density electrical discharge milling

Surface Integrity of Inconel 718 in High-Speed Electrical Discharge Machining Milling Using Air Dielectric

Ultra-high-speed combined machining of electrical discharge machining and arc machining

A highly energy-efficient milling of Inconel 718 via modulated short electric arc machining

Effect of Thermal-Hydrodynamic Coupling Energy on the Processing of Inconel 718 Superalloy

Optimization of Electrical Discharge Machining Parameters for Enhanced Performance on Inconel 718 Using Cu-Ni-B4C Nanocomposite Electrodes and Advanced Modeling Techniques

Ultrafast drilling of Inconel 718 using hybrid EDM with different electrode materials

Effects of an Electrode Material on a Novel Compound Machining of Inconel718

Machining of nickel-based super alloy inconel 718 using alumina nanofluid in powder mixed electric discharge machining

Milling performance of Inconel 718 based on DC short electric arc machining with graphite and W-Ag electrode materials

Research on the ultrasonic vibration-assisted short electric arc milling process of Inconel 718

Electro discharge machining of Inconel 718 alloy and process optimization

Unraveling the technological performance of low-energy ED-machining for processing Inconel 718 alloy: a comparative study of electrode materials

Effect of Aluminum Powder Suspended Dielectric and Silver Coated Copper Electrode on Electrical Discharge Machining Characteristics of Inconel 718

A novel Cu-Gr composite electrode development for electric discharge machining of Inconel 718 alloy

Sustainable and Efficient Processing of Gh4169 Superalloy with Rotating Short Arc Milling Method

Cutting performance and surface integrity for rotary ultrasonic elliptical milling of Inconel 718 with the ball end milling cutter

Machining Of Inconel-825 Superalloy With Magnetic Field Assisted Electrical Discharge Turning: A Optimization Approach Using Response Surface Methodology And Multi-Objective Genetic Algorithm

Experimental Study and Parameter Optimization on Sustainable and Efficient Machining GH4169 with Rotating Short Arc Milling Method

Surface Morphology Analysis of Inconel 625 through Multi-walled Carbon Nanotubes-Based Electric Discharge Machining