Abstract:The long ignition delay time, high ignition temperature and agglomeration prevent the aluminum (Al) particles from fully releasing the chemical energy stored within them during combustion. Al-based alloy fuels with high energy density and excellent combustion performance have become a potential candidate for replacement with pure Al. Therefore, understanding the combustion and energy performance of Al-based alloys is beneficial for the development of Al-based energetic materials. Herein, the combustion and energy performance of pure Al and three Al-based alloys were comparatively investigated by means of a thermal analysis system, an ignition and combustion test apparatus, and a variety of physicochemical property characterizations. The results showed that all three Al-based alloys contained at least one intermetallic compound. Al-boron (B) and Al-magnesium (Mg)-B alloys had higher theoretical energy densities than pure Al, while Al-Mg did not. The thermal oxidation properties of all three alloys were significantly better than those of pure Al. Compared with pure Al, the three alloys showed higher burning rate, shorter ignition delays, more vigorous combustion, and higher burnout at room pressure in air. This is still true after adding AP. According to the compositions of the condensed combustion products, the possible chemical reactions during the combustion of the alloys were speculated. Grasping the combustion mechanisms of the alloys is challenging due to the relative lack of thermodynamic data on intermetallic compounds. Finally, a comprehensive comparison of the combustion processes of pure Al and alloys was made. Although the Al-Mg alloy does not have the same theoretical energy density as pure Al, the more outstanding combustion performance and fewer two-phase flow losses may make up for the gap in theoretical energy density.

Research and Development of Antioxidation and Ignition-proof Magnesium Alloys

Research Progress on the Oxidation Behavior of Ignition-Proof Magnesium Alloy and Its Effect on Flame Retardancy with Multi-Element Rare Earth Additions: A Review

Development and Prospect of Ignition-proof Technique for Mg-alloy Melting Process

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Investigation into the Mechanism of Ignition of Magnesium Alloy Plates by High-Temperature Molten Droplet

The relationship between ignition and oxidation of molten magnesium alloys during the cooling process

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Influence of calcium on ignition-proof mechanism of AM50 magnesium alloy

Post-fire residual service performance of magnesium alloys reinforced by rare earths

Raising the Oxidation Resistance of Low-Alloyed Mg-Ca Alloys Through a Preheating Treatment in an Argon Atmosphere

Effects of Al, Zn, and rare earth elements on flammability of magnesium alloys subjected to sonic burner–generated flame by Federal Aviation Administration standards

Study on laser ignition and combustion characteristics of micron-sized aluminum and Al-Mg alloys particles

Review of studies on corrosion of magnesium alloys

Effect of pressure and oxygen content on the ignition and combustion of Al–Mg alloy

Recent Progress of Corrosion Prevention Method of Magnesium Alloy

What is going on in magnesium alloys?

Preparation and performance study of corrosion-resistant surfaces of magnesium alloys

Alloy Design Strategies of the Native Anti-corrosion Magnesium Alloy

Magnesium alloy and preparation method thereof

Recent Developments in Magnesium Alloy Corrosion Research

Combustion and Energy Performance of Multiple Aluminum-Based Alloy Particles