Abstract:Considering the effect of heat input of tungsten inert gas (TIG) arc welding for T-joint welding of thin-walled parts of aluminum alloy 6061-T6, here, the welding characteristics are analyzed via the finite element method. The experiments are carried out using scanning electron microscope (SEM), optical microscope (OM), and tensile test of specimens to investigate the microstructure variation of the weld zone (WZ), heat-affected zone (HAZ), and base metal (BM), and the mechanical properties of the T-welded joint. The mechanical properties of the T-welded joint are explored and assessed combined with the tensile test in terms of yield strength, tensile strength, and Vickers hardness. Furthermore, the effects of different welding currents on welding penetration variation under welding deformation are thoroughly investigated, and the appearance of porosity and incomplete fusion defects of T-welded joints are clearly illustrated. The results show that the yield and tensile strength of T-welded joints, respectively, account for less than 37% and 74% of the base metal (BM) strength. Moreover, the welding penetration depth and microstructure of T-welded joints are deeply affected by the welding current. The maximum penetration depth is achieved at about 2.18 mm under the maximum welding current, and partial welding defects emerged, affecting and reducing the mechanical properties of the welded joint. It is expected that these results will provide an analysis foundation for optimization of the welding process, suppression of welding defects, and promotion of mechanical properties for thin-walled parts in the future.

Summary of Influencing Factors in Welding Quality of Drawn-Arc Stud Welding

Study on Temperature Field of Full Welded Ball Valve During Welding Based on ANSYS

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Development and Application of Arc Stud Welding Technology

Effect of variable electrode force on weld quality in resistance spot welding

The Effect of Process Parameters on Weld Quality in Resistance Spot Welding Dual-Phase Steels

Effect of the welding process on microstructure, microhardness and residual stresses of capacitor discharge stud welded joint

Effects of process parameters on the depth-to-width ratio of flux-cored wire underwater wet welding

Analysis on Influence of Welding Residual Stress on Ultimate Bearing Capacity of Y-j oints

Effect of arc distance on temperature field and weld shape during double-sided arc welding

Weld Morphology and Grain Growth Characteristics of Driven Moving Arc Hollow Stud Welding

A Study on Welding Characteristics, Mechanical Properties, and Penetration Depth of T-Joint Thin-Walled Parts for Different TIG Welding Currents: FE Simulation and Experimental Analysis

Effects of resistance spot welding parameters on microstructure and mechanical properties of the dissimilar welded joint of quenching and partitioning steels

Welding influence on fatigue properties of two automobile steels

Effect of welding parameters on welding inherent deformations in structure materials by FEM

Influences of welding parameters on mechanical properties of AZ31 friction stir spot welds

The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloy

The Different Welding Layers and Heat Source Energy on Residual Stresses in Swing Arc Narrow Gap MAG Welding

Evaluating the Influence of Environmental Factors and Parameters on Advancements in Welding and Joining Processes: A Review

Numerical Analysis of Arc Driving Forces and Temperature Distribution in Pulsed TIG Welding

Effect of Process Factors on Tensile Shear Load Using the Definitive Screening Design in Friction Stir Lap Welding of Aluminum-Steel with a Pipe Shape