Abstract:Tandem impeller configuration has the potential to improve the performance of highly loaded transonic centrifugal compressors, while the related research is still in the early stages and general design guidelines, such as the selection of inducer meridional length, are limited so far. In this paper, a highly loaded transonic centrifugal compressor with various tandem impeller configurations is numerically investigated. The objective is to evaluate the impact of inducer meridional length [Formula: see text] on the tandem impeller flow structure and performance, and further to look into the underlying flow mechanisms and design principles of the tandem impeller. The results indicate that the inducer meridional length [Formula: see text] has significant effect on the tandem impeller and compressor stage performance. There exits an optimized tandem impeller [Formula: see text] value of Appr. 38% that achieves a compressor stage pressure ratio and efficiency gain (at the P.E. points) of 2.6% and 1.8%, respectively, and deviating from the optimized [Formula: see text] value will lead to deteriorated compressor performance. In terms of the impeller performance, the inducer trailing edge determined by the inducer meridional length [Formula: see text] should be located downstream of the passage shock to reduce the shock and inducer wake losses. However, the inducer blade should also be placed in the impeller axial part to avoid the exudcer incidence angle deviation. In terms of the diffuser performance which is partly determined by the impeller discharge flow uniformity, the inducer meridional length [Formula: see text] directly affects the tandem impeller discharge flow uniformity by rearranging and controlling the secondary flow patterns, and the flow uniformity is prone to be insensitive to the [Formula: see text] variation when the [Formula: see text] value is large enough (i.e. ≥30%). Additionally, the [Formula: see text] value should be large enough (i.e. ≥20%) to generate intense inducer shedding vortexes, which can suppress the development of Coriolis vortex and finally improve the impeller flow uniformity.

Influence of Tandem Blade on the performance and internal flow of impeller of Centrifugal Fan

Numerical Study on Internal Flows in Centrifugal Tandem-Blade Impeller

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Numerical simulation of internal flow in forward-curved centrifugal fan

Influence of Rear Blades of Tandem Rotor on Fan Performances under Different Circumferential Positions

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Impact of the Inducer Meridional Length on the Tandem Impeller Performance Within a Transonic Centrifugal Compressor

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Effect of Meridional Shape on Performance of Axial-Flow Fan

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Performance Improvement of a Highly Loaded Transonic Centrifugal Compressor with Tandem Impeller and Freeform Blade Configuration

Aerodynamics Optimization and Noise Characteristic for Forward-Swept Centrifugal Fan with Tandem Blades

Numerical Investigation of the Performance of an Axial-Flow Pump with Tandem Blades

Numerical Simulation and Analysis for a Centrifugal Fan Impeller

Effect of impeller structure on aerodynamic performance and noise reduction of a small multi-blade centrifugal fan

Performance improvement of multi-blade centrifugal fan based on impeller outlet flow control

Numerical Simulation of Flow Field for A Whole Centrifugal Fan and Analysis of the Effects of Blade Inlet Angle and Impeller Gap

3d Numerical Simulation Of Centrifugal Fan Inside Flow Field And Modification Investigation

Effect of Three Dimensional Blade Technology on Aerodynamic Performance in Centrifugal Fan

The Influence of the Blade Outlet Angle on the Flow Field and Pressure Pulsation in a Centrifugal Fan

Effect of Interaction between Centrifugal Impeller and Volute Tongue on the Performance and BPF Noise