Abstract:Super-aligned carbon nanotube (CNT) arrays are distinguished from normal vertically-aligned CNT arrays by their ?super-aligned? nature, i.e., the CNTs in super-aligned arrays have a much better alignment than those in ordinary arrays. The key feature of a super-aligned CNT array is that continuous yarns or thin films, which are composed of a thin layer of parallelly-aligned pure CNTs, can be directly drawn from it in solid state. The as-produced yarns or thin films are transparent and highly conductive, with aligned CNTs parallel to the draw direction. Many potential applications for these have been demonstrated, for example as polarizers, transparent conducting films, and polarized light sources etc. After passing through volatile solutions or being twisted, the yarns or thin films can be further condensed into shrunk yarns. These shrunk yarns have high tensile strengths and Young's moduli, and are good candidates for thermionic and field emission electron sources. In this talk, I will present our progress in controlled synthesis, physical properties of super-aligned CNT arrays, and more applications such as high reduced brightness field emission electron source, low work function thermionic emission electron source, CNT-based Nanogrid for HRTEM, anodes for Lithium-ion Battery, incandescent displays will be demonstrated. At the end of 2007, we found that very thin carbon nanotube films, once fed by sound frequency electric currents, could emit loud sounds. This phenomenon could be attributed to a thermoacoustic effect. The ultra small heat capacity per unit area of carbon nanotube thin films leads to a wide frequency response range and a high sound pressure level. Based on this finding, we made practical carbon nanotube thin film loudspeakers, which possess the merits of nanometer thickness, transparent, flexible, stretchable, and magnet-free. Such a single element thin film loudspeaker can be tailored into any shape and size, freestanding or on any insulating sur- faces, which could open up new applications of and approaches to manufacturing loudspeakers and other acoustic devices.

Design and Application of Carbon Nanotube Film Loudspeaker in Active Noise Control

Simulation and Experimental Demonstration of Sound Field Control Using Beam Deflection

A Method of Sound Field Control Using Beam Deflection

Super-aligned carbon nanotubes — From growth mechanism to loudspeakers

Flexible, Stretchable, Transparent Carbon Nanotube Thin Film Loudspeakers

Acoustic And Optoelectronic Nature And Interfacial Durability Of Modified Cnt And Gnp-Pvdf Composites With Nano-Structural Control

Thermoacoustic chips with carbon nanotube thin yarn arrays.

High Frequency Response Of Carbon Nanotube Thin Film Speaker In Gases

Design and Evaluation of Active Noise Control on Machinery Noise

Challenges in the Implementation of Active Noise Control Technologies

Simulation Analysis of Thermoacoustic Effect of CNT Film with Metasurface-Enhanced Acoustic Autofocusing

Spectrum-Driven Acoustic Metasurface for Broadband Noise Control

Carbon Nanotubes/nanofibers for Microwave Amplifiers and Parallel E-Beam Lithography

Flexible Two-Dimensional Ti3C2 MXene Films as Thermo-Acoustic Devices.

No relation between body mass and gastro-oesophageal reflux symptoms in a Swedish population based study

Position Optimization for Secondary Speaker and Error Sensor of Duct Active Noise Control System

A compound secondary source for active noise radiation control

Analysis of Transient Thermoacoustic Characteristics and Performance in Carbon Nanotube Sponge Underwater Transducers

Progress of research on active noise radiation control with reflecting surfaces

Carbon Nanomaterials: A New Sustainable Solution to Reduce the Emerging Environmental Pollution of Turbomachinery Noise and Vibration

A Unidirectional Secondary Sound Source for Local Active Noise Control in Enclosures