Abstract:The effect of cascade aerodynamic optimization on turbomachinery design is very significant. However, for most traditional cascade optimization methods, aerodynamic parameters are considered as boundary conditions and rarely directly used as the optimization variables to realize optimization. Given this problem, this paper proposes an improved cascade aerodynamic optimization method in which an incidence angle and nine geometric parameters are used to parameterize the cascade and one modified optimization algorithm is adopted to find the cascade with the optimal aerodynamic performance. The improved parameterization approach is based on the Non-Uniform Rational B-Splines (NURBS) method, the camber line superposing thickness distribution molding (CLSTDM) method, and the plane cascade design method. To rapidly and effectively find the cascade with the largest average lift-drag ratio within a certain range of incidence angles, modified particle swarm optimization combined with the modified very fast simulated annealing algorithm (PSO-MVFSA) is adopted. To verify the feasibility of the method, a cascade with NACA4412 and a practical cascade are optimized. It is found that the average lift-drag ratios of two optimal performance cascades are respectively increased by 13.38% and 15.21% in comparison to those of two original cascades. Meanwhile, through optimizing the practical cascade of the Blade D500, under different volume flow rates, the pressure coefficient of the optimized cascade is increased by an average of more than 6.12% compared to that of the prototype, and the average efficiency is increased by 11.15%. Therefore, this improved aerodynamic optimization method is reliable and feasible for the performance improvement of cascades with a low Reynolds number.

Aerodynamic Optimization Design of Cascade Airfoil Using Hybrid Evolutionary Algorithms

Aerodynamic Optimization Design of Airfoil Configurations Based on Cascade Feedforward Neural Network

Multidisciplinary Optimization of Transonic Wing Using Evolutionary Algorithm

Aerodynamic Optimization for Cascade Blade Based on Niche GAs and RANS Equation

Optimization Design of Airfoil Based on Hybrid Genetic Algorithm and Compound Form Method

Aerodynamic Design Optimization of Cascade Airfoils Based on Multiobjective Genetic Algorithm

Aerodynamic Optimization and Mechanism Investigation on Performance Improvements in a Transonic Compressor Cascade

Optimization of aerodynamic design for cascade airfoil by means of Boltzmann selection genetic algorithms

Aerodynamic design optimization of compressor blade using genetic algorithms and response surface model

MULTIOBJECTIVE OPTIMIZATION DESIGN OF A COMPRESSOR AIRFOIL USING EVOLUTIONARY ALGORITHMS

Optimization and Numerical Simulation of High-Turning Tandem Cascade

Investigation of Differential Evolution Algorithm for a Tandem Cascade Optimization

Extraction of Geometric Features and Analysis of Flow Mechanism of High Loaded Compressor Airfoils at Low Reynolds Number

Design Optimization Of Transonic Compressor Rotor Using Cfd And Genetic Algorithm

Genetic Algorithms Development for Multiobjective Design Optimization of Compressor Cascade

A Study on multidisciplinary optimization of an axial compressor blade based on evolutionary algorithms

Applications of an Improved Aerodynamic Optimization Method on a Low Reynolds Number Cascade

Optimization Design of Compressor Cascade with Swept and Curved Blades

Design and Optimization of Tandem Cascade Based on Parallel Differential Evolution Algorithm

A Surface Parametric Control and Global Optimization Method for Axial Flow Compressor Blades

Aerodynamic Optimum Design of Transonic Turbine Cascades Using Genetic Algorithms