Application Software System Based On Direct Slicing For Rapid Prototyping
Y. Shi,X. Chen,D. Cai,S. Huang
DOI: https://doi.org/10.1080/00207540410001671688
IF: 9.018
2004-01-01
International Journal of Production Research
Abstract:A direct-slicing approach might improve the accuracy and quality of small, complex parts produced with rapid prototyping technology. An application software based on direct slicing for rapid prototyping was used on the foundation of PowerSHAPE models. Lines, conic arcs and cubic bezier curves were adopted as the basic elements describing the direct-slicing contours. Moreover, a scheme to carry out subdivided software development was proposed. A picture (PIC) format file was selected as an interface for the slicing data, and a macro-AutoSection software, which collects the direct-slicing contour data of arbitrary complex computer-aided design models and provides power to produce the direct-slicing PIC files, was developed. On the above basis, an application software called PDSlice based on direct-slicing data processing was developed for the commercial selective laser sintering machine HRPS-III, which was made at the Huazhong University of Science and Technology (HUST), P. R. China. The major input and output interfaces as well as the PIC model reconstruction method of the PDSlice are described. Furthermore, a batch of direct-slicing polymer parts were successfully fabricated with the selective laser sintering machine. The application example shows that the accuracy and surface finish of three-dimensional complex curvature surface parts fabricated with the application software system based on a direct-slicing format were better than the application software system based on a stereolithography (STL) format.