Abstract:Aiming at the problems of over stacking, warping deformation and rapid adjustment of layer thickness in electron beam additive manufacturing, the 3D printing slicing algorithm and partition scanning strategy for numerical control systems are studied. The GPU (graphics processing unit) is used to slice the 3D model, and the STL (stereolithography) file is calculated in parallel according to the normal vector and the vertex coordinates. The voxel information of the specified layer is dynamically obtained by adjusting the projection matrix to the slice height. The MS (marching squares) algorithm is used to extract the coordinate sequence of the binary image, and the ordered contour coordinates are output. In order to avoid shaking of the electron gun when the numerical control system is forming the microsegment straight line, and reduce metal overcrowding in the continuous curve C0, the NURBS (non-uniform rational b-splines) basis function is used to perform curve interpolation on the contour data. Aiming at the deformation problem of large block components in the forming process, a hexagonal partition and parallel line variable angle scanning technology is adopted, and an effective temperature and deformation control strategy is formed according to the European-distance planning scan order of each partition. The results show that the NURBS segmentation fits closer to the original polysurface cut line, and the error is reduced by 34.2% compared with the STL file slice data. As the number of triangular patches increases, the algorithm exhibits higher efficiency, STL files with 1,483,132 facets can be cut into 4488 layers in 89 s. The slicing algorithm involved in this research can be used as a general data processing algorithm for additive manufacturing technology to reduce the waiting time of the contour extraction process. Combined with the partition strategy, it can provide new ideas for the dynamic adjustment of layer thickness and deformation control in the forming process of large parts.

Study on the Method of Adaptive Slicing Contour Line Based on STL Model

Volumetric adaptive slicing of manifold mesh for rapid prototyping based on relative volume error

Geometry-based Adaptive Surface Mesh Generation for STL Models

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

A Method of Constructing Layered Multi-connected Domains for Manifold Mesh Model Based on Adjacency Topology

A Novel Adaptive Slicing Algorithm Based on Ameliorative Area Ratio and Accurate Cusp Height for 3D Printing

Fast Parallel Algorithm for Slicing Stl Based on Pipeline

Fast Surface Mesh Generation for STL Models

Adaptive Slicing of Implicit Porous Structure with Topology Guarantee.

Efficient cutting area detection in roughing process for meshed surfaces

ADAPTIVE LAYERED CARTESIAN CUT CELL METHOD FOR THE UNSTRUCTURED HEXAHEDRAL GRIDS GENERATION

Geometry-based adaptive mesh generation for continuous and discrete parametric surfaces

Slicing Heterogeneous Solid Using Octree-Based Subdivision and Trivariate T-splines for Additive Manufacturing

SLICING DATA PROCESSING AND GLOBAL OPTIMIZATION OF FEATURE CURVE IN REVERSE ENGINEERING

Support generation for additive manufacturing based on sliced data

An Adaptive Tool Path Generation for Fused Deposition Modeling

Adaptive Slicing Method for Hermite Non-Planar Tessellated Surfaces Models

Efficient Algorithm for Automatic Toothed Support Structure Generation in Rapid Prototyping

Slicing Algorithm and Partition Scanning Strategy for 3D Printing Based on GPU Parallel Computing

Direct Slicing of T-spline Surfaces for Additive Manufacturing

STL-free design and manufacturing paradigm for high-precision powder bed fusion