Abstract:According to poor mechanical performance such as passing and leveling difficult in hilly areas,the terrain adaptive and dynamic leveling agricultural chassis for hilly area was designed.Four groups of leveling suspension' s cantilever angle can be precisely adjusted,so the chassis can not only have the capability to adjust its own configuration to accommodate to the terrain with which it interacted and contacted,but also can locomote continuously along the ground curve of terrain surface as far as possible,moreover,it also can realize the body leveling control through the suspension' s cantilever angle adjustment.The design scheme can resolve the two problems during the chassis locomotion on the uneven ground.During the terrain adaptive locomotion,the tilt sensor can measure the inclination angle of the chassis body in real time,so the instantaneous cantilever angle adjustment value of each suspension can be calculated.And the dynamic compensation leveling of the chassis can be realized by adjusting the cantilever angle of each suspension accurately.Three-dimensional model was established by using 3D modeling software referring to Dongfanghong 500 tractor,and the model was imported into dynamic analysis software ADAMS for simulation analysis.By analyzing the simulation process,the chassis can achieve dynamic leveling control so well that the accuracy of both roll angle and pitch angle just was within 0.5°.A small scale prototype was developed and tested in the soil bin,and the chassis can perform dynamic leveling control so well that the accuracy of both roll angle and pitch angle just was within 1 ° during terrain adaptive locomotion with multi DOF.The simulation,experiments in the soil bin or on the natural ground can verify the theoretical analysis and calculation results,and provide reference for the application of terrain adaptive and dynamic leveling agricultural chassis in the hilly area.

Research on Automatic Leveling Device of Suspension and Elevation Type

Development and key technologies of pneumatic suspension system for zero-gravity simulation

Research on Automatic Leveling Control System of Casing Rotator

Research and Design of the Gravity Unloading Device for Circular Solar Arrays

Design and Simulation of an Air Floating Platform with Zero Gravity Self-adjusting

Spacecraft leveling method based on adjusting suspension point of hoist equipment

Development of Mechanical Self-leveling Device for Vehicle Height

Thermal-Structure Coupling Analysis of Microgravity Environment Simulation Suspension Structure for Large Space Deployable Mechanisms

Development of Support Automatic Leveling System of Large Expansion Vehicle Medical Shelter

The Ground Test System of Double Layer Air Floating Platform and Its Application

Development of an Agricultural Vehicle Levelling System Based on Rapid Active Levelling

Preliminary design and development of an active suspension gravity compensation system for ground verification

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

Study on Precise Leveling Method of Heavy Load Platform

OPTIMIZATION DESIGN AND EXPERIMENT OF AUTOMATIC LEVELING SYSTEM FOR ORCHARD OPERATING PLATFORM IN HILLY AND MOUNTAINOUS AREAS

Launch vehicle work platform leveling device

Automatic leveling of Hexapod micro-vibration system supported by air springs

DESIGN AND ANALYSIS OF INDEPENDENT STRUT TYPE AIR SUSPENSION APPLIED TO HIGH CLEARANCE SELF-PROPELLED SPRAYER

Design and Experiment of Adaptive Leveling Chassis for Hilly Area

Terrain Adaptive and Dynamic Leveling Agricultural Chassis for Hilly Area

Study on suspension technique of space electrostatic accelerometer