Abstract:The cutting and crushing of coal and rock containing gangue is the result of the coupling effect of multiple factors. The geometric parameters of the working mechanism, the kinematic parameters of the shearer, and the physical and mechanical properties of the coal and rock to be cut all affect the cutting and crushing process of the shearer. To study the coal falling trajectory of cutting coal and rock using a spiral drum, optimal cutting parameters were obtained, efficient cutting using a spiral drum was achieved, and analysis of the coal falling trajectory and strength of the drum of a shearer based on bidirectional coupling technology was proposed based on particle discrete element contact theory and virtual prototype technology. The discrete element method multi-flexible body dynamics two-way coupling method was used to obtain cutting and interactive information about the spiral drum for a complex coal seam with gangue. The cutting conditions of the spiral drum under different cutting depths, rotational speeds, and traction speeds were determined. The movement status of coal and rock particles was monitored under different working conditions. Coal falling trajectory equations for the coal and rock particles were compiled under different working conditions, and the coal falling trajectory curve was drawn. The optimal coal loading rate was used as the measurement standard for the coal falling trajectory, and the optimal coal falling trajectory of the drum was obtained through full factor experiments. The load of the drum and pick was extracted, their stress and deformation were analyzed, and fatigue life analysis was performed on the pick with the highest stress. The results indicate that the maximum deformation occurs on the cutting teeth that are cutting hard gangue. The stress of the tooth seat is mainly concentrated at the root of the tooth seat, and its maximum equivalent stress is less than the yield limit value of the selected material. Therefore, the material selection and structural design of the drum are safe and reliable. By building a coal mining machine cutting coal and rock experimental platform and monitoring the working status of the designed spiral drum, it meets the usage requirements. Based on industrial experiments conducted underground, the measured average coal loading rate of the shearer drum was 46.31%, achieving stable operation and verifying that the designed drum of the shearer has an efficient cutting ability.

Load Characteristics and Experiment Research of the Pin Roll on Rail Chair of Scraper Conveyor

Experimental Research on theMchannical Behavior of Ranging Arm Shell For Shearer

Analysis and Experimental Research on Load Characteristics of Smooth Shoe Pin of Shearer

Design Research on Roller of New Fiber Carding Machine

Design and Control of Multilevel Loadings Hydraulic System of Direct Shear Apparatus

Analysis of the Ship Loader's Vibration Mode in the Roll-On Process and the Reinforcement Scheme

Fatigue Life Research of the Idler Shaft on Rocker Arm Shearer

ANALYSIS ON THE INFLUENCE OF THE LOAD THE END PLATE OF THE DRUM SHEAER

STUDY ON SCRAPER CONVEY OR CHAIN TENSION TESTING SYSTEM

Development of Load System for High-Speed Railway Rolling

Coal falling trajectory and strength analysis of drum of shearer based on a bidirectional coupling method

Tension Characteristics Analysis of Scraper Chain of Heavy‐Duty Scraper Conveyor with Time‐Varying Loads

Analysis of Scraper Conveyor Chain Dynamics under Falling Coal Impact Conditions

Screening the Main Factors Affecting the Wear of the Scraper Conveyor Chute Using the Plackett–Burman Method

Development of loading experiment table for shearer-drum-height mechanism

Study on dynamic characteristics of scraper conveyor under various scraper configurations

Dynamic characteristics of scraper conveyor chain drive system under the impact condition of lump coal

Longitudinal torsional vibrations of the chain drive system of mine scraper conveyor

Analysis on the influence law of traction speed on the cutting performance of coal containing hard concretion

A Study on the Dynamic Transmission Law of Spiral Drum Cutting Coal Rock Based on ANSYS/LS-DYNA Simulation

Development of Test Rig for High-Speed Railway Rolling Bearings