Abstract:Advances in Mechanical Engineering, Volume 16, Issue 9, September 2024. A rolling bearing plays a key role in the gearbox of the cold rolling mill transmission system. As a result, the degradation and failure of bearings can lead to unplanned shutdowns of the entire rolling mill system. Since on-site cold rolling mills work usually in non-steady lubrication rolling conditions originating form variations of multiple parameters, the uncertainty affecting bearing performance in a cold rolling mill transmission system increases, making it more difficult to assess health status and predict the remaining service life of bearings, Therefore, by establishing a coupling model describing the relationship for the rolling mill and normal /faulty gearboxes under non steady rolling conditions, quantitatively studies the influence of various rolling parameters of a rolling mill on the fatigue service life of bearings in the gearbox of the rolling mill transmission system, and verify the effectiveness of linear cumulative damage theory for bearing fatigue service life through experiments and on-site bearing vibration data. The results indicate that as the thickness of the strip steel inlet, lubricant viscosity, and rolling speed increase, or the thickness of the strip steel outlet and rolling roll radius decrease, the service life of bearings gradually decreases. As the fluctuation amplitude of various rolling parameters in the cold rolling mill increases, the service life of bearings in the gearbox of the rolling mill transmission system gradually shortens. Moreover, when the rolling parameter value or fluctuation amplitude increases to a specific values, the remaining service life of bearings will sharply decrease. Under the same rolling conditions, the service life of bearings in gearboxes with faults decreases more significantly than that in normal gearboxes.

Feasibility Research on Application of Roller Based Main Bearing in Engines

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Research on the thermohydrodynamic lubrication performance of engine main bearing with rough surface considering the axial motion and deformation of crankshaft

Analysis of Factors Affecting Lubrication Performance of Main Bearings of Service Diesel Engine Based on Orthogonal Design Method1

Lubrication Performance of Connecting-Rod and Main Bearing in Different Engine Operating Conditions

Experimental investigations to assess surface fatigue failure in rolling contact bearing

Research on the service life of bearings in the gearbox of rolling mill transmission system under non-steady lubrication state

Combined Influence Mechanism of the Flexible Free Outer Ring on Contact Characteristic in Heavy-Load Cam Roller Bearings

Overview of Friction and Wear Performance of Sliding Bearings

The impact of advanced lubrication strategies on the performance of oil-lubricated multi-bearing systems

Numerical study on lubrication performance of engine main bearing with rough surface considering axial movement of crankshaft

Study on Dynamics of Rolling Bearings

Preliminary Simulation Study on Rolling-Sliding Integrated Auxiliary Bearings

Analysis on Contact Strength of Needle Roller Bearing of Transmission and Effect of Surface Modification

A Review of Dynamic-Tribological Simulation Methods for Sliding Bearings in Internal Combustion Engines

The effects of material and structure of main bearing caps on crankshaft lubrication of diesel engine

Advancements of Simulative Analysis and Test Method of Bearings for I. C. Engine

Lubrication Analysis of Small-End Bearings of Reciprocating Engines Based on Orthogonal Experiment

A fatigue failure investigation and improvement of a high-speed cylindrical roller bearing in a turbofan engine

Research the lubrication characteristics on the modified main thrust roller of the slewing bearings