A Machine Vision System for Position Measurement of Small Holes on Spherical Surface

Jie Huang,Bin Xu
DOI: https://doi.org/10.13494/j.npe.20150020
2016-01-01
Nanotechnology and Precision Engineering
Abstract:This paper presents a machine vision system for the position measurement of small holes fabri-cated on a spherical surface.The machine vision system consists of two rotation stages to rotate the meas-urement sample, an imaging sensor to scan the surface profile of the small hole under detection and a vi-bration-isolation table to reduce the disturbance of the measurement environment.In this paper, the ap-proach to measuring the spatial position of small holes was firstly introduced based on the method of or-thogonal rotary scanning.Due to that the image quality around the hole edge was influenced by the ma-chining defects and machining marks, the image processing algorithm to search the hole edge and to de-termine the hole centre was described in detail.Then, to verify the feasibility of the machine vision sys-tem, the position measurement of a hemispherical artifact, of which the radius was 60 mm and on which the surface was fabricated with small holes with radius of 2 mm, was carried out.Furthermore, the meas-urement repeatability of the spatial position of small holes was experimentally investigated, and the meas-urement accuracy of that was also studied by an optical autocollimator.Experimental result indicates that the repeatability errors were 1.0″and 1.4″, the maximum deviations of the hole position measurement were 2.13″and 4.13″.
What problem does this paper attempt to address?