Abstract:The cam-linkage mechanism is a typical transmission mechanism in mechanical science and is widely used in various automated production equipment. However, conventional modeling methods mainly focus on the design and dimensional synthesis of the cam-linkage mechanism in the slow-speed scenario. The influence of component dimensions is not taken into consideration. As a result, the model accuracy dramatically falls when analyzing large-size cam-linkage mechanisms, especially in high-speed environments. The kinematic aspects of cam design have been investigated, but there are few studies discussing the motion characteristic and accuracy analysis models of the large-size cam-linkage mechanism under high-speed scenarios. To handle such issues, this paper proposes a parameter optimization methodology for the design analysis of the large-size high-speed cam-linkage mechanism considering kinematic performance. Firstly, the mathematical model of the cam five-bar mechanism is presented. The cam curve and motion parameters are solved forward with linkage length and output speed. Then, a particle swarm-based multi-objective optimization method is developed to find the optimal structure parameters and output speed curve to minimize cam pressure angle and roller acceleration and maximize linkage mechanism drive angle. A Monte Carlo-based framework is put forward for the reliability and sensitivity analysis of kinematic accuracy. Finally, a transverse device of a sanitary product production line is provided to demonstrate the applicability of the proposed method. With the parameter optimization, the productivity of the transverse device is doubled, from 600 pieces per minute (PPM) to 1200 PPM.

Generic Algorithm Based Linkage Optimization Method for Approximate Straight Line

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

OPTIMIZATION OF MODIFIED WATT’S LINKAGE FOR AN APPROXIMATELY LONG STRAIGHT PATH WITHIN LIMITED DIMENSION

Structural Optimization of Typical Rigid Links in a Parallel Kinematic Machine

High-Speed Link Design Optimization Using Machine Learning SVR-AS Method

Topology optimization of linkage mechanisms using spring-connected link model

General program of kinematic analysis of planar linkage

Optimal Synthesis of Linkages for Motion Generation

Computer-Aided Synthesis of Linkage-Type Straight-Line and Dwell Mechanisms

Optimization Design of Steering Linkage in Independent Suspension Based on Genetic Algorithm

Parameter Optimization of Large-Size High-Speed Cam-Linkage Mechanism for Kinematic Performance

Research on Web-Based Optimization for Path Generation Synthesis of Planar Four-Bar Linkage

Design Framework for Motion Generation of Planar Four-Bar Linkage Considering Clearance Joints and Dynamics Performance

Joint Search of Optimal Topology and Trajectory for Planar Linkages

A Variation Analysis Method for Linkage Mechanism with Consideration of Joint Clearance and Deformation

Study on a New Computer Path Synthesis Method of a Four-Bar Linkage

Link adjustment for spatial multi-loop deployable structures considering redundant constraints based on multi-objective discrete optimization

An articular force optimization method of parallel manipulator with actuation redundancy

Synthesis Theory and Optimum Design of Four-bar Linkage with Given Angle Parameters

Path synthesis of a four-bar linkage using a teaching-learning-based optimization algorithm

Virtual Link-Lengths Approximating Method for Forward Kinematics of Multiple Motion-Coupled Linkage Mechanism