Abstract:Topology synthesis of multi-rigid-body mechanisms has always been a very important stage in the mechanism design process. In most cases, the topology of the multi-rigid-body mechanism for particular task is obtained by designers’ experience and ingenuity, rather than automatic approach. In this work, an approach of topology optimization of multi-rigid-body mechanisms is investigated. The core process of the approach is an automatic optimization design process. In this approach, we construct kinematics mapping from truss structures to the joint-linked mechanisms, which transforms the topology optimization problem of multi-body system into the truss structure optimization problem. We also develop a new strategy for topology optimization of statically determinate truss, the advantage of which lies in the ability dealing with statically determinate truss topology optimization problem compared to the existing methods. By automatically optimizing the topology of the truss structure, the topology of the multi-rigid-body mechanism is optimized automatically, accordingly. Here, we utilize the investigated approach to design suitable layout for multi-rigid-body micro-displacement amplifying mechanisms (MMAMs) with a large amplification ratio (>50). The layout consists of not only the topology information of the mechanism, but also the dimension parameters of the mechanism. The procedure of the approach is carried out in steps, and a human–computer interaction program has been developed for it. Using the developed program, different MMAMs are achieved. Meanwhile, the direct kinematics analysis of the MMAMs is achieved automatically, the existence of dead point position in the mechanism within movement range is checked and the micro-displacement amplification ratio is calculated out. The computing results are validated by the ADAMS® motion simulation, which proves that the achieved MMAMs fully fulfill the functional requirement. Along with two of the achieved MMAMs, the approach is explained, its functionality is shown, its advantages, limitations, some open problems and future works are discussed.

Topology optimization of linkage mechanisms using spring-connected link model

Topology optimization of compliant mechanisms including links, supports and material distribution

An Approach of Topology Optimization of Multi-Rigid-body Mechanism

The Topology Optimization of Controllable Path-Generating Compliant Mechanisms

A new method for optimizing the topology of hinge‐free and fully decoupled compliant mechanisms with multiple inputs and multiple outputs

Topology optimization for rigid and compliant hybrid mechanisms

Optimal Synthesis of Linkages for Motion Generation

An overlapped plane model and topology optimization for planar mechanism synthesis

Compliant Mechanism Synthesis Using Nonlinear Elastic Topology Optimization With Variable Boundary Conditions

Topology Optimization of Compliant Mechanisms Using Moving Morphable Components with Flexure Hinge Characteristic

A Novel Isogeometric Topology Optimization Framework for Planar Compliant Mechanisms

Topology-optimization based design of multi-degree-of-freedom compliant mechanisms (mechanisms with multiple pseudo-mobility)

Topology Optimization for Hybrid Lattice Compliant Mechanisms with Multiple Microstructures

Topology Synthesis and Classification of Low-Mobility Parallel Mechanisms

Integrated Topology Optimization of Multi-Component Structures Considering Connecting Interface Behavior

Spring-Joint Method for Topology Optimization of Planar Passive Compliant Mechanisms

Topology optimization of a spatial compliant parallel mechanism based on constant motion transmission characteristic matrix

Structural Topology Optimization Using a Moving Morphable Component-Based Method Considering Geometrical Nonlinearity

Compliant Mechanism Design Using A Strain Based Topology Optimization Method

Stress-based topology optimization of compliant mechanisms design using geometrical and material nonlinearities