Abstract:This article investigates the camera calibration problem in the field of computer vision, which is a key technology connecting 2-D vision with 3-D world and directly affecting the accuracy of computer vision systems. In this article, a camera calibration method is proposed by combining a laser projection turntable. The proposed method includes the following main contributions. First, a homemade laser projection turntable is utilized, and the initial poses of the turntable are calibrated using the least-squares method. A coordinate transformation technique is employed to convert the encoded light spots emitted by the laser into 3-D world coordinates, and the mechanical errors of the laser projection turntable are analyzed. To address the issue of light spot deformation, an elliptical light spot centroid detection algorithm is proposed to obtain accurate pixel coordinates of the light spot centroids. Next, the projection matrix is computed using the direct linear transform (DLT) method, and the camera is calibrated for distortion correction using a radial distortion model. Furthermore, a nonlinear optimization algorithm is employed to further optimize the projection matrix and distortion parameters. Finally, this method was applied to camera calibration with both slight and severe distortions and compared to three traditional calibration methods and two novel approaches. The experimental results demonstrate that the proposed method achieves higher calibration accuracy and efficiency. In conclusion, the proposed camera calibration method, which combines a laser projection turntable, effectively overcomes issues such as distortion and deformation, enabling accurate camera calibration and yielding satisfactory results in the experiments.

Study on the Calibration Model for 3D Machine Vision Measuring System

Camera Calibration Technique Based on Virtual 3D Object

Calibration of a Single-Point Laser Range Finder and a Camera

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Robot Base Frame Calibration with a 2D Vision System for Mobile Robotic Drilling

Study on Remote Monitoring System of 3D Scanning and Measuring Machine

High Accuracy Calibration Method for Multi-Line Structured Light Three-Dimensional Scanning Measurement System Based on Grating Diffraction.

Spatiotemporal Decoupling Based LiDAR-Camera Calibration under Arbitrary Configurations.

A Novel Camera Calibration Method Based on Multiple Calibration Planes

A Target-based Calibration Method for LiDAR-Visual-Thermal Multi-Sensor System.

Automatic Calibration Between Multi-Lines LiDAR and Visible Light Camera Based on Edge Refinement and Virtual Mask Matching

Camera Calibration in 3-D Measurement Systems

Calibrating Laser Three-Dimensional Projection Systems Using Binocular Vision

An Automatic Calibration Method in the Crop Architecture 3D Scanner

Calibration Method for Wide-Field Machine Vision System Based on Laser Projection Turntable

STUDY ON THE LINE SCAN CCD CAMERA CALIBRATION OF VEHICLE-BORNE 3D DATA ACQUISITION SYSTEM

Automatic Geometrical Calibration for Multiprojector-Type Light Field Three-Dimensional Display

Study on Camera Calibration of Vision System

A novel approach on calibration calibration of a laser line sensor's position in the machine coordinate system

Calibration method of 1D laser rangefinder for large-scale 3D measurement under harsh environment

Calibration of the laser displacement sensor and integration of on-site scanned points