Abstract:LiDAR-camera calibration is a precondition for many multi-sensor systems that fuse data from LiDAR and camera. However, the constraint from common field of view and the requirement for time synchronization make the calibration a challenging problem. In this paper, we propose a novel LiDAR-camera calibration method aiming to eliminate these two constraints. Specifically, we capture a scan of 3-D LiDAR when both the environment and the sensors are stationary, then move the camera to reconstruct the 3-D environment using the sequentially obtained images. Finally, we align 3-D visual points to the laser scan based on a tightly couple graph optimization method to calculate the extrinsic parameter between LiDAR and camera. Under this design, the configuration of these two sensors is free from the common field-of-view constraint due to the extended view from the moving camera. In addition, we also eliminate the requirement for time synchronization as we only use the single scan of laser data when the sensors are stationary. We theoretically derive the conditions of minimal observability for our method and prove that the accuracy of calibration is improved by collecting more observations from multiple scattered calibration targets. In addition, the proposed method is beneficial to not only plane measurement error-based calibration targets, such as chessboards, but also other point measurement error-based calibration targets, such as boxes and polygonal boards. We validate our method on both simulation and real-world data sets. Experiments show that our method achieves higher accuracy than other comparable methods, which is in accordance with our theoretical analysis.

An Automatic Calibration Method in the Crop Architecture 3D Scanner

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

Automatic Calibration Between Multi-Lines LiDAR and Visible Light Camera Based on Edge Refinement and Virtual Mask Matching

A Novel Camera Calibration Method Based on Multiple Calibration Planes

A Calibration Technique of the Mechanical Parameters in 3D Laser Scanning Measurement System

Study on Calibration Method for 3-D Laser Scanning Systems

Automated Eye-in-Hand Robot-3D Scanner Calibration for Low Stitching Errors.

A Calibration Method for a Self-Rotating, Linear-Structured-Light Scanning, Three-Dimensional Reconstruction System Based on Plane Constraints

An Integration and Accurate Calibration Method of 3D Scanning System for In-Situ Shape Measurement *

A Self-Calibration Method for 3d Laser Scanning System Based on Finite Difference Method

A Self-calibration Method for Engineering Using 3D Laser Scanning System Based on Cube Vertices

An Analytic Calibration Method for Turntable-Based 3D Scanning System

Calibration Of 3d Laser Measurement System Based On Projective Transformation

Auto-calibration Technology Based on 3D Raster Measuring

Study on the Calibration Model for 3D Machine Vision Measuring System

An Automatic Laser Sheet Calibration Method for Laser Scan Range Measurement System

Calibration of a portable laser 3-D scanner used by a robot and its use in measurement

A High Accuracy Camera Calibration for Vision-Based Measurement Systems

A Novel Automatic Calibration Method for Displacement Sensors Based on the Spatial Transformation Theory

STUDY ON THE LINE SCAN CCD CAMERA CALIBRATION OF VEHICLE-BORNE 3D DATA ACQUISITION SYSTEM

Geometric calibration for LiDAR-camera system fusing 3D-2D and 3D-3D point correspondences