Abstract:Single-screw compressor has attracted attentions from the scientific community due to its excellent performance. However, thermal deformations of the star wheel, screw, and casing substantially affect the clearance between the components, and hence reduce the performance of the single-screw compressor. In this study, the thermal deformation of a meshing pair of the single-screw compressor was investigated using a finite-element-based thermo-mechanical coupled model. This model was developed based on measured thermal boundary conditions during compressor operation. The effect of thermal deformation on the compressor sealing clearance was then studied. The results showed that the thermal deformation of the casing, screw, screw shaft, and star wheel significantly affected the clearance between the tooth tip and the groove bottom as well as the meshing pair clearance distribution. The change of clearance between the casing and screw is up to 0.03 mm while the change of the clearance between the star wheel tooth tip and screw groove is up to 0.05 mm. Furthermore, it was found that the spatial position meshing error caused by the thermal deformation was one of the major reasons for the wear of the meshing pair of the single-screw compressor. The simulated thermal deformation results agreed well with the experimental data. The clearances of the compressor were modified based on the thermal deformation in a single-screw compressor with a capacity of 6 m(3)/min and the results showed that the modified compressor can operate reliably. This indicated that the developed model could be used in the design of the single-screw compressor. It provides guidance for the design and optimization of large single-screw compressors.

The Twist of Unfortunate Fate and Suspension Meshing Technology with Liquid Injection in Single Screw Compressors

Development of Single Screw Compressor Technologies and Their Tendency

Refreshed Internal Working Characteristics of the Single Screw Compressor Based on Experimental Investigation

Numerical investigation of thermal deformation of meshing pairs in single screw compressor

Status and Hot Spot of Twin Screw Compressor

An optimization of the star-wheel profile in a single screw compressor

Hydrodynamic Lubricating Characteristics of Water Flooded Single Screw Compressors Based on Two Types of Meshing Pair Profile

Study of the thermo-mechanical couple deformation of the meshing pairs of a single-screw compressor

Research and Development on Design Theory and Key Technology of Screw Compressors

A Review of Recent Research and Application Progress in Screw Machines

Research of Wear-out-failure of Star-wheel Teeth in Single Screw Compressors

Dynamic Characteristics Improvement of the Single Screw Compressor with Odd-Grooves Screw Rotor

Experimental Studies of the Tooth Wear Resistance with Different Profiles in Single Screw Compressor

Meshing Pair Geometry of the Intersecting-Axis Internally Geared Screw Compressor

Deformation Analysis of the Main Components in A Single Screw Compressor

Study on the Selection of Single-Screw Steam Compressors in Industrial Steam Supply

Structure and Theory for a Taper Twin Screw Compressor

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Column Envelope Meshing Pair and Its Design Method for Single Screw Compressors

Development of a Water-Injected Twin-Screw Compressor for Mechanical Vapor Compression Desalination Systems

Analysis of Circumferential Force on Star-wheel in Single Screw Compressors