Abstract:In this study, spatial localization and visual data are integrated for the full data acquisition of the LNG storage tank's exterior wall, and a step‐by‐step registration method is used to produce the global point clouds. 3D deformations of the exterior wall are systematically described in different dimensions, from global to local. Change detection methods for measuring deformation of the LNG storage tank's exterior wall cannot meet the requirements for extensive and comprehensive deformation analysis. The method proposed in this paper uses multi‐source spatial data to detect the deformation of the LNG storage tank's exterior wall. Exterior wall data collected simultaneously by terrestrial and airborne laser scanners, as well as close‐range and oblique photogrammetry, are pre‐processed separately and then registered to the global point clouds. The deformation state of exterior wall is represented by a thorough assessment approach that takes into account four change indices. The results suggest that the registration precision of global point clouds is 6 mm. The global ovality of the LNG storage tank is 0.053%, with a tilt change of 2.58° and a deviation of 27 mm in the direction of the azimuth of 321.98°, an average value of 0.07 mm for depression and protrusion deformation, and a surface flatness of 21.3 mm. In this case, the flatness is greater than the variation threshold of the standard specification, indicating that the tank may have structural uneven settlement or other deformation problems. The attraction of the proposed method resides in its capacity to efficiently and accurately obtain spatial positioning and color information of the LNG storage tank's exterior wall, thereby providing a robust foundation for precise judgments regarding the deformation state.

Preliminary Research on Deformation Measurement for the Vertical Tank

Method of Deformation Measurement for Vertical Tank Based on 3D Laser Scanning Method for Production Safety Oil Depot

Measurement Method for Vertical Tank Deformation Based on Laser Scanning Principle.

A Novel Radius Measurement Method for Vertical Oil Tank Based on Laser Tracking and Wall-Climbing Robot.

Research on 3D laser scanning method for tank volume metrology and its comparison experiment analysis

Study on 3D Laser Scanning Method for Horizontal Tank Volume Measurement

Precise Measurement of Liquid Petroleum Tank Volume Based on Data Cloud Analysis

Study on Vertical Liquid Petroleum Tank Volume Measurement Method Based on Data Cloud Analysis

Research on tank volume metrology for petroleum and liquid petroleum products based on 3D laser scanning method

A New Method of Gas Storage Tank Pillar Deformation Monitoring Based on Scanner Points

Measurement of deformed surface and key data processing based on reverse engineering

Precise Measurement on Form of Horizontal Tank Used for Liquid Volume Metrology by Laser Scanning Method

Research on Course Radius Measurement for Vertical Petroleum Tank Volume Metrology Based on 3D Laser Scan Principle

Full-field deformation reconstruction for large-scale cryogenic composite tanks with limited strain monitoring data

Influence of Temperature and Hydrostatic Pressure to the Deformation of Tank

Automatic Measurement System for Vertical Tank Volume by Electro-Optical Distance-Ranging Method

The non-contact precision measurement and noise reduction method for liquid volume metrology

3D Change Detection Method for Exterior Wall of LNG Storage Tank Supported by Multi‐Source Spatial Data

A new measurement method of three-dimensional laser scanning for the volume of railway tank car (container)

Study on Internal Electro-optical Measuring Method For Horizontal Tank Volume Measurement

Research of Curve Fitting Method on the Measured Settlement of Tanks