Structure Characterization and Performance Estimate for Thermal Solidified RDX Explosive by Μct

张伟斌,黄辉,田勇,宗和厚,戴斌,关立峰

DOI: https://doi.org/10.3969/j.issn.1006-9941.2009.04.029

2009-01-01

Chinese Journal of Energetic Materials

Abstract:The inner structure characteristic of RDX base explosive has been studied by μCT technology before and after fully thermal solidification.

What problem does this paper attempt to address?

Shock Response of 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX): the C-N Bond Scission Studied by Molecular Dynamics Simulations

Jiao-Nan Yuan,Yong-Kai Wei,Xiu-Qing Zhang,Xiang-Rong Chen,Guang-Fu Ji,Meena Kumari Kotni,Dong-Qing Wei

DOI: https://doi.org/10.1063/1.5005804

IF: 2.877

2017-01-01

Journal of Applied Physics

Abstract:The shock response has a great influence on the design, synthesis, and application of energetic materials in both industrial and military areas. Therefore, the initial decomposition mechanism of bond scission at the atomistic level of condensed-phase α-RDX under shock loading has been studied based on quantum molecular dynamics simulations in combination with a multi-scale shock technique. First, based on the frontier molecular orbital theory, our calculated result shows that the N-NO2 bond is the weakest bond in the α-RDX molecule in the ground state, which may be the initial bond for pyrolysis. Second, the changes of bonds under shock loading are investigated by the changes of structures, kinetic bond lengths, and Laplacian bond orders during the simulation. Also, the variation of thermodynamic properties with time in shocked α-RDX at 10 km/s along the lattice vector a for a timescale of up to 3.5 ps is presented. By analyzing the detailed structural changes of RDX under shock loading, we find that the ...
Towards the Low-Sensitive and High-Energetic Co-Crystal Explosive CL-20/TNT: from Intermolecular Interactions to Structures and Properties

Xiu-Qing Zhang,Jiao-Nan Yuan,Gurudeeban Selvaraj,Guang-Fu Ji,Xiang-Rong Chen,Dong-Qing Wei

DOI: https://doi.org/10.1039/c8cp01841c

2018-01-01

Abstract:Employing molecular dynamic (MD) simulations and solid-state density functional theory (DFT), we carried out thorough studies to understand the interaction-structure-property interrelationship of the co-crystal explosive 1:1 CL-20:TNT. Our results revealed that the co-crystallization of CL-20 and TNT molecules enhances the intermolecular binding forces, where the main driving force for the formation of the co-crystal CL-20/TNT comes from HO and CO interactions, while OO contributes to the co-crystal stabilization. Furthermore, we also used the concept of atoms in molecule (AIM) and the reduced density gradient (RDG) to describe the spatial arrangements and interactions of co-crystal compositions, which showed that although the adjoining TNT molecules possess two symmetry groups and the adjoining CL-20 molecules possess the same symmetry group, their interactions are not identical. These spatial arrangements provide a good reference to the formation of other co-crystals. When the obtained structural and detonation properties of the three crystals were compared, it was observed that the CL-20/TNT co-crystal achieved the desirable properties of explosives, i.e., low-sensitivity and high-energy, possessing the advantages of both CL-20 and TNT explosives.
A unified model of anisotropy, thermoelasticity, inelasticity, phase transition and reaction for high-pressure ramp-loaded RDX single crystal

Kun Yang,Yanqing Wu,Yi Wu,Fenglei Huang,Tao Chong,Zhaohui Zhang,Xianxu Zheng

DOI: https://doi.org/10.1016/j.ijplas.2021.103048

IF: 8.5

2021-09-01

International Journal of Plasticity

Abstract:A unified thermomechanical consistent model integrating multiple mechanisms, including material anisotropy, nonlinear thermoelasticity, inelasticity, phase transition kinetics, and chemical reaction, is developed for cyclotrimethylene trinitramine (RDX) crystal under high-pressure ramp-loading. (i) The nonlinear thermoelasticity of material is described by pressure-temperature-dependent elasticity tensor and a free-energy based complete equation of state. (ii) The cracking-mediated brittle damage on eleven cleavage planes and dislocation-mediated ductile plasticity on thirteen slip systems are considered in inelastic deformation. (iii) The phase transition kinetics is dependent on a thermodynamic consistent driving force. (iv) The chemical reaction is described by a reactive flow model integrating equations of state for solid reactants and gaseous products, Arrhenius-type reaction rate model and mixed rule. The proposed model is utilized to simulate the mechanical-thermal-chemical responses of (100) and (010) oriented ramp-loaded RDX crystals at pressure up to ∼33GPa. The simulated results are well in agreement with the experimental data and reveal a four-wave structure (elastic-inelastic-phase transition-reaction wave) hidden behind the pressure wave profiles. Crack and dislocation activities on (110) and (1-10) crystal planes play a dominant role in macroscopic inelasticity of (100) oriented RDX. Compared to (100) oriented RDX, the (010) oriented RDX exhibits a higher α→γ phase transition criterion and a faster chemical reaction, which is associated with the different overall heating rate and thermomechanical state.

materials science, multidisciplinary,engineering, mechanical,mechanics
Theoretical calculation into the effect of molar ratio on the structures, stability, mechanical properties and detonation performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane/ 1,3,5-trinitro-1,3,5-triazacyco-hexane cocrystal

Ye-Bai Shi,Liang-Fei Bai,Jia-Hui Li,Guang-Ai Sun,Jian Gong,Xin Ju

DOI: https://doi.org/10.1007/s00894-019-4181-6

2019-09-03

Abstract:Molecular dynamics (MD) simulation was conducted to research the effect of molar ratio on the thermal stability, mechanical properties, and detonation performance of HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocane)/RDX (1,3,5-trinitro-1,3,5-triazacyco-hexane) cocrystal explosive at ambient condition. The binding energy, mechanical properties, and the detonation parameters of the pure β-HMX, RDX crystal, and the cocrystal models were got and contrasted. The results demonstrate that molar ratio has a great influence on the properties of the cocrystal system. The binding energy of the cocrystals has the maximum values at the 1:1 molar ratio, indicating that the stability of HMX/RDX(1:1) cocrystal is the best and HMX and RDX may prefer to cocrystallizing at 1:1 molar ratio. What's more, the tensile modulus (E) and shear modulus (G) of the HMX/RDX(1:1) cocrystals have the minimum value, while the C12-C44 and K/G have the maximum value, implying that the cocrystal at 1:1 molar ratio has the best mechanical properties. Simultaneously, the E, K, and G of the cocrystals are all smaller than those of β-HMX's and generally larger than those RDX's, while the Cauchy pressure (C12-C44) and K/G ratio were greater, demonstrating that cocrystallizing can improve the brittleness and enhance the ductility. The detonation velocity (D) and detonation pressure (P) decrease with the rising RDX content, while the properties are still superior to the pure RDX crystal; thus, the energy properties of the cocrystal are still excellent. In a word, HMX/RDX cocrystal at 1:1 molar ratio has the best thermal stability, mechanical properties, and the excellent energetic performance.
Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

Junying Wu,Jiaojiao Wu,Junjian Li,Yiping Shang,Lang Chen

DOI: https://doi.org/10.1021/acsomega.3c01160

IF: 4.1

2023-06-06

ACS Omega

Abstract:The addition of binders to energetic materials is known to complicate the thermal decomposition process of such materials. To assess this effect, the present work studied the thermal decomposition of cyclotrimethylene trinitramine (RDX)/hydroxy-terminated polybutadiene (HTPB) mixtures and of pure RDX over the temperature range of 2000-3500 K by combining the classical reaction and first-principles molecular dynamics methods. The incorporation of HTPB as a binder was found to significantly reduce...

chemistry, multidisciplinary
ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Huanan Wei,Tianpeng Li,Kai Yao,Zhaolong Xuan

DOI: https://doi.org/10.1007/s00894-022-05377-4

IF: 2.172

2022-11-17

Journal of Molecular Modeling

Abstract:ReaxFF molecular dynamics (ReaxFF MD) simulations were performed to study the thermal decomposition property of cyclotrimethylenetrinitramine (RDX)-based composite modified double base (CMDB) propellants. The intermediate products and final products of the decomposition of RDX-based CMDB propellants at 2000 K, 2500 K, and 3000 K are obtained. The simulation results show that the decomposition of RDX and RDX/HTPB/Al is primary triggered by N-NO 2 rupture, and then, the intermedia products undergo a series of complex interactions to form final products. The final products of RDX/HTPB/Al are H 2 and N 2 , while the final products of pure RDX are H 2 , N 2 , and H 2 O. In addition, the abundance of the main intermediate products generated by RDX/HTPB/Al is lower than that of RDX, in that the reaction between intermediate products is more complex for RDX/HTPB/Al. Moreover, the decomposition rate of RDX/HTPB/Al increases with the increasing temperature.

chemistry, multidisciplinary,biochemistry & molecular biology,biophysics,computer science, interdisciplinary applications
Enhancing RDX Thermal Decomposition in Al@RDX Composites with Co Transition Metal Interfacial Layer

Su-Lan Yang,Kan Xie,Jing Wang,Bingchen An,Bin Tian,Hongqi Nie,Jie-Yao Lyu,Qi-Long Yan

DOI: https://doi.org/10.3390/aerospace11010081

IF: 2.66

2024-01-17

Aerospace

Abstract:In this study, an Al/Co@RDX composite was meticulously prepared through a combination of planetary high-energy ball-milling and a spray-drying technique. The thermal reactivity of these Al/Co@RDX composites was comprehensively investigated and compared using the TG/DSC technique. It is shown that the initial decomposition temperature of RDX in the DSC curve was decreased by 26.3 °C in the presence of Al/Co, which could be attributed to the nano-sized Co transition metal catalyzing the decomposition reaction of nitrogen oxides in RDX decomposition products. The decomposition peak temperature of RDX and the heat released by the thermal decomposition of RDX in the Al/Co@RDX composite were decreased by 26.3 °C and increased by 74.5 J·g−1, respectively, in comparison with those of pure RDX. The types of major gaseous products released from Al/Co@RDX were found to be identical to those of pure RDX, encompassing N2O, CH2O, CO2 and HCN. However, the concentrations of those gaseous products for Al/Co@RDX were higher than those observed for pure RDX, which may owe to the fact that the Al/Co composite can interact with the –CH2 and –NO2 within RDX molecules, which leads to the weakening of the C-N and N-N bonds. In addition, the decomposition of RDX in the Al/Co@RDX composite was observed as a one-step process with an apparent activation energy (Ea) of 115.6 kJ·cm−3. The decomposition mechanism of the RDX in the Al/Co@RDX composite was identified to follow the chain scission model (L2), whereas the two-step decomposition physical models observed for pure RDX were found to closely resemble the L2 and autocatalytic models.

engineering, aerospace
Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Xinlei Jia,Wenshan Peng,Lanjuan Xu,Qing Cao,Shaohua Xing,Guangyi Liu,Xiaoheng Geng,Haiying Guo,Guojun Han,Jingyu Wang

DOI: https://doi.org/10.1155/2021/1650939

IF: 3.791

2021-10-18

Journal of Nanomaterials

Abstract:In order to reduce the mechanical sensitivity of cyclotrimethylenetrinitramine (RDX) and improve its energy density, spherical RDX/PMMA/NC composite particles were prepared by spray drying method, selecting polymethyl methacrylate (PMMA, hydrocarbon binder) with excellent mechanical properties and nitrocellulose (NC, energy-containing binder) with higher density as the desensitizing shell material, RDX as the core material. PMMA/NC composite particles of the same component were prepared by a simple solvent evaporation method at the same time. Structural characterizations and thermal stability of the composites were systematically studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimeter (DSC), respectively. Moreover, the safety performance has been qualitatively tested and analyzed through impact sensitivity and friction sensitivity. The results show that the addition of NC/PMMA binder would not change the original crystal structure of RDX, and the RDX/NC/PMMA composites fabricated by spray drying presented spherical particles with uniform distribution and smooth surface. The Tp0 of RDX/NC/PMMA composite particles increased from 220.3°C to 228.2°C, improving the thermal decomposition performance. The H50 rose from 29.32 cm to 84.3 cm, and the probability of friction explosion decreased from 96% to 8%, significantly enhancing the safety performance. In short, the RDX/NC/PMMA composites prepared via the spray drying method and the improvement of their performance have positive significance for the development of explosives in pursuit of high energy and low sensitivity.

materials science, multidisciplinary,nanoscience & nanotechnology
Exposed Facets and Surface Properties of Highly Explosive RDX Studied by the Crystal-Face-Indexing Method and Theoretical Calculations

Liyuan Wei,Yiru Chen,Yongjie Li,Yiyi Xiao,Mi Yan,Jinkun Guo,Xianggui Xue,Qilong Yan,Yu Liu,Shiliang Huang

DOI: https://doi.org/10.1021/acs.cgd.3c01404

IF: 4.01

2024-04-16

Crystal Growth & Design

Abstract:The crystal morphology of highly explosive cyclotrimethylenetrinitramine (hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX)) has been characterized by the crystal-face-indexing method in combination with single-crystal X-ray diffraction and rotation imaging techniques. As a result, the morphology importance of the facets in RDX crystals grown in acetone and dimethyl sulfoxide (DMSO) is on the order of (111) ≈ (210) > (021) ≈ (102) > (001) ≈ (010) ≈ (100) and (111) > (210) > (010) > (001) ≈ (021), respectively. Crystal sizes have also been measured along the a-, b-, and c-axes, which show a less-preferred orientation of RDX crystals than octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) crystals. In addition, the {111} and {210} facets show good thermodynamic stability, while the appearance of the other facets is dynamically affected by solution conditions during the growth of RDX crystals from the hundred-micrometer scale to the millimeter scale. After crystal face indexing, surface models were built for the dominant {111} and {210} facets as well as the special {010} facet. On the surface of the {111} facet, the outstanding H and O atoms lead to a regular arrangement of positive and negative charges. For the {210} facet, twisted grooves are observed on the surface in the Connelly surface model. More interestingly, large hollows with dimensions of 11.6 × 11.8 Å2 are generated on the surface of the {010} facet. The high adsorption ability of the hollows to DMSO molecules plays a key role in the enhanced morphology importance of the {010} facet in DMSO, as evidenced by molecular dynamics simulations. All of these results can be applied to the morphology control of energetic crystals and will be a good reference to the interfacial interaction of the RDX crystal in both polymer-bonded explosives (PBXs) and propellants.

chemistry, multidisciplinary,materials science,crystallography
Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

Ali Reza Zarei,Narges Zohari,Hamid Kardan,Saeed Tavangar,Mohammad Ali Zarei

DOI: https://doi.org/10.1080/07370652.2024.2401847

IF: 2.421

2024-09-23

Journal of Energetic Materials

Abstract:Simultaneous achievement of both low sensitivity and high energy is crucial in practical applications of high energetic materials such as HMX and RDX. In this work, TNT, a low-sensitive explosive, was used to improve sensitivity and thermal stability of HMX and RDX explosives. The method is based on coating HMX and RDX with TNT using solvent-anti-solvent technique. The characterization of samples was done by scanning electron microscopy (SEM), transmission electron microscope (TEM), and X-ray diffraction (XRD). The SEM and TEM images revealed that a layer of TNT was coated on the HMX and RDX surfaces. TG/DSC thermograms for HMX/TNT and RDX/TNT show that decomposition enthalpy change (Δ H ) increased to 121.1 and 197.6 J/g compared to pure HMX and RDX, respectively. Fluidity test results showed that the fluidity of the samples improved from medium to good grade after coating. The impact sensitivity for HMX/TNT and RDX/TNT improved to 7.35 and 19.62 J, respectively. Also, friction sensitivity for coated HMX and RDX increased to 210.2 and 196.1 N. The electrostatic discharge experiments showed that HMX/TNT and RDX/TNT were safer than pure HMX and RDX. Therefore, the coated samples will be good candidates for energetic formulations.

materials science, multidisciplinary,chemistry, physical,engineering, chemical, applied
Pressure-induced metallization of condensed-phase RDX: molecular dynamic simulations in conjunction with MSST method

Zi-Qiu Bai,Jing Chang,Guang-Fu Ji,Ni-Na Ge

DOI: https://doi.org/10.1139/cjc-2018-0256

2019-04-01

Canadian Journal of Chemistry

Abstract:The anisotropy of impact sensitivity and microscopic electron properties of the cyclotrimethylene trinitramine (C 3 H 6 N 6 O 6 ) (RDX) under shock loading are investigated in our work. The simulation is performed using molecular dynamic (MD) simulations in conjunction with multi-scale shock technique (MSST). By calculating the microscopic electronic properties and combining the thermodynamic properties, we predict that the metallization pressure of the RDX crystal is approximately 170 GPa under shock loading, which is slightly less than the metallization pressure under hydrostatic pressure. We also found that the microscopic electronic properties are related to the impact sensitivity. When the shock loading is along the z direction, the time of the transition from the insulating state to the metallization of the RDX crystal lags behind the shock loading along the x or y direction. Therefore, we predict that the RDX crystal has a lower sensitivity when the shock loading is along the z direction.

chemistry, multidisciplinary
Mechanochemical fabrication and properties of CL-20/RDX nano co/mixed crystals

Xiaolan Song,Yi Wang,Shanshan Zhao,Fengsheng Li

DOI: https://doi.org/10.1039/c8ra04122a

2018-10-04

Abstract:By milling 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) together, a nano CL-20/RDX co/mixed crystal explosive with a mean particle size of 141.6 nm is prepared from the raw materials, and the co/mixed crystals are characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, infrared (IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC) and thermal-infrared spectrometry online (DSC-IR) technology; furthermore, the impact, friction and thermal sensitivity of the samples are tested. The results show that after milling, the morphology of the co/mixed crystal explosive is near-spherical, and the particle size reveals a normal distribution. The milled sample showed the same molecular structure and surface elements as the raw materials, but the XRD test shows that CL-20/RDX has a new crystal phase and the Raman and IR spectra gave a supplementary confirmation for the existence of a cocrystal phase in the milled sample. The activation energy of the thermal decomposition of CL-20/RDX is 206.49 kJ mol-1 higher than that of raw RDX. DSC-IR analysis showed that the thermolysis of CL-20/RDX produces a large amount of CO2 and N2O and a small amount of H2O, NO2 and NO. The mechanical sensitivity of CL-20/RDX is very low. In impact sensitivity tests with a 5 kg hammer, the special height (H 50) is 51.43 cm, which is higher than the values of 36.43 cm for raw CL-20 and 9.78 cm for raw RDX. In the friction sensitivity tests, the explosion probability (P) is 56%; however, the thermal sensitivity of CL-20/RDX is higher than that of the raw materials, with its 5 s burst point being only 243.51 °C.
A new insight into the mechanical behavior of high-quality RDX in pressed polymer bonded explosives

Bing-Xin Liu,Qi-Xuan Du,Shi-Xiong Chen,Jiu-Hou Rui,Da-Bin Liu

DOI: https://doi.org/10.1016/j.mtcomm.2023.105622

IF: 3.8

2023-03-11

Materials Today Communications

Abstract:The compressive strength, shear strength, and tensile strength of three pressed polymer bonded explosives (PBXs) with different formulations were studied to evaluate the mechanical behavior of high-quality RDX (H-RDX, D 50 =134.4 μm) in the system. For further investigation, molecular dynamics simulation, scanning electron microscope, and surface energy calculation were used to research the distinction between the results that the smooth, hard particles made. It is revealed that H-RDX doesn't play a constructive role in the system of pressed PBXs. The surface energy (30.9 mJ·m −2 ) of H-RDX verifies that coating agents are harder to spread on H-RDX crystals with "better" surface conditions, leading to the decrease of binding force between binders and crystals. The mechanical strengths of H-RDX-based pressed PBXs thus are weakened, and the loading capacity is reduced by up to 65%. Moreover, higher bulk elastic modulus (16.26 GPa) and Poisson's ratio (0.25) of H-RDX crystal contribute to the reduction during grains' preparation and testing, respectively. It is hoped that this work provides a referential experience for the application of H-RDX and other reduced-sensitivity explosives.

materials science, multidisciplinary
Preparation and Characterization of A Novel Cocrystal Explosive

Jin P. Shen,Xiao H. Duan,Qing P. Luo,Yong Zhou,Qiaoliang Bao,Yong J. Ma,Chong H. Pei

DOI: https://doi.org/10.1021/cg1017032

IF: 4.01

2011-01-01

Crystal Growth & Design

Abstract:On the basis of our previous Molecular Dynamics (MD) Simulation (Wei, C. X.; Huang, H.; Duan, X. H.; Pei C. H. Propell. Explos. Pyrot. 2009, 67, 2822−2826), a cocrystal explosive (CCE) consisting of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) has been prepared with a solvent/nonsolvent (S/NS) process. Scanning electron microscopy (SEM) demonstrated that crystal morphology of the CCE was significantly improved in contrast to the crystal of HMX and TATB. Differential scanning calorimetry (DSC) showed that the CCE exhibited the enhancement of thermal stability and became less sensitive to impact, compared with the HMX. Raman spectroscopy, terahertz time-domain spectroscopy (THz-TDS), and X-ray photoelectron spectroscopy (XPS) provided characterization at the molecular level. The results indicated that the main mechanism of cocrystal originates from the N−O···H hydrogen bonding between −NO2 (HMX) and −NH2 (TATB).
Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Guangyu Wang,Yushi Wang,Quan Wen

DOI: https://doi.org/10.1080/01495739.2019.1607790

IF: 3.456

2019-05-03

Journal of Thermal Stresses

Abstract:It is known that the reaction rate of the thermal decomposition of polymer-bonded explosives exposed to cook-off has a certain relation with temperature, confining pressure and some other factors, which were verified by many experiments. Temperature-dominated thermal-decomposition models were developed for various high explosives and applied to study their decomposition process, such as HMX- and TATB-based polymer-bonded explosives. These models have reasonable accuracy. For example, the multistep thermal-decomposition model of PBX 9501 (which consists of 95% HMX, 2.5% Estane and 2.5% BDNPA/F) proposed by Tarver considers decomposition of both HMX and polymer binders. The temperature-dominated thermal-decomposition model only applies to preignition thermal decomposition. After ignition occurs, the dominant mechanism of the reaction transforms to deflagration and subsequent explosion, where the effect of pressure can no longer be neglected. Furthermore, the time scale of deflagration and explosion (millisecond or microsecond) differs significantly from the time scale of slow thermal decomposition (hours or minutes). The numerical model of postignition phenomenon (deflagration and final explosion) is still under investigation and is far from maturity. The predicted violence scale resulting from thermal explosion does not agree with experiment very well. An alternative method is to conduct a thermal–mechanical analysis for preignition stage, which takes advantage of a developed temperature-dominated thermal-decomposition model, and to analyze the stress caused by quasi-static thermal expansion. Herein, a thermal–mechanical analysis is implemented for a one-dimensional time-to-explosion experiment (ODTX) and a scaled thermal explosion experiment (STEX) with HMX-based polymer-bonded explosives inside using the finite element method. Then, the finite element model is applied to investigate the thermal decomposition of PBX 9501 inside an explosive device exposed to cook-off. The regions that have maximum temperature, maximum hydrostatic pressure and maximum von Mises stress are identified based on simulation results, which can benefit future improvement of the explosive device.

thermodynamics,mechanics
Effects of particle size and content of RDX on burning stability of RDX-based propellants

Bin-bin Wang,Xin Liao,Luigi T. DeLuca,Wei-dong He

DOI: https://doi.org/10.1016/j.dt.2021.05.009

IF: 4.035

2021-05-01

Defence Technology

Abstract:Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel (CV) and extinguished burning surface characterization relying on interrupted closed vessel (ICV) and scanning electron microscope (SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size, respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of u-p curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.

engineering, multidisciplinary
Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.

Fangjian Shang,Yinhua Ma,Meiheng Lv,Chaoyang Zhang,P. Zhou,Jianyong Liu

DOI: https://doi.org/10.1021/acs.jpca.1c10900

2022-03-08

Abstract:Interpreting the initial decomposition mechanism is important for evaluating the thermal stability of explosives. In this study, we theoretically investigated the initial thermal decomposition reactions for two typical energetic materials, FOX-7 and RDX, in both the gas phase and crystal phase. Single molecular decomposition pathways in the gas phase are calculated using the density functional theory (DFT) method, and the crystal phase reactions are simulated through the MM/DFT-based ONIOM method. The calculation results indicate that the crystal environment has a significant influence on the initial thermal decomposition mechanism of FOX-7 and RDX. The cage effect induced by the crystal environment greatly confines molecular mobility and diffusion, rendering the generated small molecules to react with the remaining fragment and yield new decomposition channels compared with the gas phase condition. The crystal packing structures and intermolecular interactions (hydrogen bonds/π-π stacking) significantly increase the reaction barriers of FOX-7 and RDX, leading to the crystal phase reactions being more difficult to occur than in the gas phase. Since the practical application of explosives is mostly in the crystal state, it is important to consider the environmental effects on the initial decomposition reactions. The same insight can also be relevant for other energetic materials.

Medicine,Materials Science,Chemistry
[New strategies in the treatment of chronic viral hepatitis].

M. Manns,P. Neuhaus

1995-12-01

Der Internist

Abstract:
Thermal stability evaluation of black powder, RDX, PETN and TNT

QS Wang,JH Sun,SN Chen,Y Liu,Z Wang

2005-01-01

Abstract:Black powder, RDX, PETN and TNT are very important high energy explosives. All are used in a wide variety of military and industrial formulations owing to their suiable properities. In this work, the thermal decomposition charateristics of black powder, RDX, PETN and TNT were studied using C80 calorimeter thermal analytical techniques. Their kinetic parameters such as decomposition activation energy, the pre-exponential factor of the thermal decomposition reaction are evaluated by C80 micro calorimetry techniques. The self-accelerating decomposition temperatures (SADT) of 25 kg package material are caculated and compared by Semenov and Frank-Kamenctskii model, and the SADTs calculated by Semenov model are about 1.2-17.5 degrees C higher than the ones caculated by Frank-Kamenetskii model.
Theoretical study on initial decomposition paths of energetic materials featuring RDX ring

Fangjian Shang,Yanlin Shi,Caifeng Wang,Huaxin Liu,Meiheng Lv

DOI: https://doi.org/10.1002/qua.27320

2024-01-06

International Journal of Quantum Chemistry

Abstract:Abstract The molecular properties of RDX are affected by the introduction of different functional groups, and the decomposition process of these analogues is studied in this paper. DFT method is used to study the initial decomposition reaction paths of 30 high energy materials based RDX skeleton. In the nitro cleavage reaction, the energy barrier become relatively low by introducing CH(NO 2 ) 2 or C(NO 2 ) 3 groups on the C site of the six membered ring. In the ring opening reaction, the ring opening process is easier to proceed by introducing NH 2 or NHNH 2 groups on the C site of the six membered ring.

chemistry, physical,physics, atomic, molecular & chemical,mathematics, interdisciplinary applications,quantum science & technology

Structure Characterization and Performance Estimate for Thermal Solidified RDX Explosive by Μct

Shock Response of 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX): the C-N Bond Scission Studied by Molecular Dynamics Simulations

Towards the Low-Sensitive and High-Energetic Co-Crystal Explosive CL-20/TNT: from Intermolecular Interactions to Structures and Properties

A unified model of anisotropy, thermoelasticity, inelasticity, phase transition and reaction for high-pressure ramp-loaded RDX single crystal

Theoretical calculation into the effect of molar ratio on the structures, stability, mechanical properties and detonation performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane/ 1,3,5-trinitro-1,3,5-triazacyco-hexane cocrystal

Molecular Dynamics Simulations of the Thermal Decomposition of RDX/HTPB Explosives

ReaxFF molecular dynamics simulations on thermal decomposition of RDX-based CMDB propellants

Enhancing RDX Thermal Decomposition in Al@RDX Composites with Co Transition Metal Interfacial Layer

Preparation, High-Density Spherical, and Low Sensitivity of RDX/NC/PMMA Composite Particles

Exposed Facets and Surface Properties of Highly Explosive RDX Studied by the Crystal-Face-Indexing Method and Theoretical Calculations

Preparation, characterization, and investigation of thermal behavior of improved HMX and RDX through coating by TNT

Pressure-induced metallization of condensed-phase RDX: molecular dynamic simulations in conjunction with MSST method

Mechanochemical fabrication and properties of CL-20/RDX nano co/mixed crystals

A new insight into the mechanical behavior of high-quality RDX in pressed polymer bonded explosives

Preparation and Characterization of A Novel Cocrystal Explosive

Thermal–mechanical analysis for confined HMX-based polymer-bonded explosives

Effects of particle size and content of RDX on burning stability of RDX-based propellants

Mechanistic Investigation on the Initial Thermal Decomposition of Energetic Materials FOX-7 and RDX in the Crystal and Gas Phase: An MM/DFT-Based ONIOM Calculation.

[New strategies in the treatment of chronic viral hepatitis].

Thermal stability evaluation of black powder, RDX, PETN and TNT

Theoretical study on initial decomposition paths of energetic materials featuring RDX ring