Abstract:Due to the existence of microstructures involving characteristic length scales, micropolar materials such as bones, rocks and foam materials usually have complex fracture behaviors. The near-tip fields of an anti-plane crack in micropolar media and the local cracking modes, however, remain unclear. In this paper, the Williams asymptotic solutions of the near-tip fields of an anti-plane crack in micropolar elasticity are derived. A force stress intensity factor (FSIF) and two couple stress intensity factors (CSIFs) are the key fracture parameters characterizing the anti-plane crack-tip fields. And the energy release rate for an anti-plane crack is similar to the Rice's J-integral for classical continua. Then, six crack modes are introduced for a three-dimensional micropolar solid, i.e., three global modes controlled by the FSIFs and three local modes controlled by the CSIFs. Different from classical isotropic elasticity, a material constant appears in the singular terms of the crack-tip force stress and couple stress fields of isotropic micropolar materials. In addition, there are six constant terms in the asymptotic solutions of the crack-tip fields, i.e., three constant force stresses and tree constant couple stresses similar to the T-stress in classical fracture mechanics. Sequentially, the J-integral for three-dimensional micropolar solids is expressed concisely by the FSIFs and CSIFs. It can be observed that the CSIFs normalized by the torsion and bending characteristic lengths are dimensionally equivalent to the FSIFs. This work provides a theoretical basis for studying the fracture performance and crack propagation criterion of micropolar materials.

Crack Arrest Effect in Thin Plates

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

Stress Field Around Crack Tip Inside Thin Current-Carrying Plate

A Penny-Shaped Crack in an Infinite Linear Transversely Isotropic Medium Subjected to Uniform Anti-Symmetric Heat Flux: Closed-form Solution

A Penny-Shaped Crack in Transversely Isotropic Magneto-Electro-thermo-elastic Medium Subjected to Uniform Symmetric Heat Flux

Finite Element Analysis of Crack Dynamic Response in Gradient Non- Homogeneous Finite Plate

Coupled crack tip fields under the action of an electric current

Analysis of Stress Field in Thick Cylinder with Circular Crack Arrested by Electromagnetic Heating

Steady-state Thermo-Elastic Field in an Infinite Medium Weakened by a Penny-Shaped Crack: Complete and Exact Solutions

Effect of High Density Electric Current Field on Fatigue Cracks in Stainless Steel

A crack in a confocal elliptical inhomogeneity embedded in an infinite matrix subjected to uniform heat flux

Stress Intensity Factor in Current-Carrying Plate with Central Penetrated Linear Crack under Action of Loading

Optical Analysis of HRR Field

Crack Arrest Behavior of Central-Cracked Stiffened Plates under Uniform Tensions

Thermal shock fracture in a cracked strip: Incorporating convective heat transfer between lateral surfaces and ambient environment

Technique for producing crack arrest by electromagnetic heating

Instantaneous thermal fracture behaviors of a bimaterial with a penny-shaped interface crack via generalized fractional heat transfer

Analytical and Numerical Analyses for a Penny-Shaped Crack Embedded in an Infinite Transversely Isotropic Multi-Ferroic Composite Medium: Semi-Permeable Electro-Magnetic Boundary Condition

Effect of cracking on the thermoelectric conversion efficiency of thermoelectric materials

Stress analysis for a lip-shaped crack in a thermoelectric plate under combined electrical and thermal loadings

Crack-tip Fields of an Anti-Plane Crack in Micropolar Elastic Solids