Abstract:Supercritical carbon dioxide (S-CO2) Brayton cycle system is a promising closed-loop energy conversion system frequently mentioned in the automotive and power generation field in recent years. To develop a suitable design methodology for S-CO2 turbines with better performance, an understanding of the vortex flow patterns and associated aerodynamic loss inside a S-CO2 turbine is essential. In this paper, a hundred-kilowatt level S-CO2 axial turbine is designed and investigated using a three-dimensional transient viscous flow simulation. The NIST Span and Wagner equation of state model that considers the real gas effects is utilized to estimate the thermodynamic properties of the supercritical fluid. The numerical methods are experimentally validated. The results indicates that the aspect ratio and tip-to-hub ratio are different in the S-CO2 turbine from that in the gas turbine, and the vortex flow patterns are influenced notably by these geometrical parameters. Both the vortex structure and moving tracks of passage vortices are changed as a result of large centrifugal force. An interaction between tip leakage vortex and hub passage vortex is observed in the impeller passage and its formation and development mechanism are revealed. To further explore the aerodynamic loss mechanism caused by vortex interaction, the energy loss in the impeller passage is analyzed with the enstrophy dissipation method, which can not only accurately calculate the energy loss but also estimate how the vortical motions occur. It is found that the enstrophy and energy loss can be effectively reduced by vortex interaction between tip leakage vortex and hub passage vortex. The results in this study would increase the knowledge of vortex flow patterns in S-CO2 turbine and the proposed enstrophy production method can be used intuitively to provide a reference for flow vortical motion study in turbines.

Stratified flow phenomena of the endwall boundary layer in supercritical CO2 turbine cascades

Les and Cdns Investigation of T106c Low Pressure Turbine

Study on Flow Characteristics of a Turbulent Boundary Layer and Vortex Structure of High Pressure Guide Vanes in SCO 2 Turbines

Numerical Study of the Secondary Flow in Steam Turbine Static Cascade under Varying Conditions

Flow Characteristics Analysis of Main Flow Channel and Clearance of a Supercritical CO2 Turbine

Numerical Study On End-Wall Flow In Highly Loaded Supercritical Compressor Cascades

Study on Application of Transverse Secondary Flow Controlled by Endwall Warping

High-resolution Measurement and Analysis of the Transient Secondary Flow Field in a Turbine Cascade

Study of Flow Structures Within Turbine Cascade with Large Tip Clearance

Research of Non-axisymmetric Endwall Application on High Pressure Turbine

Investigation on unsteady characteristics of flow separation in a supercritical carbon dioxide centrifugal compressor

Flow resistance analysis of non-isothermal supercritical CO2

Study of Unsteady Shear Flow Near Stall in a Shrouded Supercritical Carbon Dioxide Centrifugal Compressor

Investigation of non-axisymmetric endwall contouring in a high loaded turbine stator cascade

Study on flow loss mechanism in a supercritical fluid radial inflow turbine nozzle

Vortex Patterns Investigation and Enstrophy Analysis in a Small Scale S-CO2 Axial Turbine

Analysis of the Flow Inside the Variable Geometrical Power Turbine Stator/rotor Cascade and Exhaust Gas Duct of a MW Class Gas Turbine

Turbine Blade Endwall Heat Transfer And Film Cooling Performance With Multi-Gap Jets And Film Holes

Numerical Investigation on Wet Steam Non-Equilibrium Condensation Flow in Turbine Cascade

Non-Uniform Two-Phase Flow of Supercritical Carbon Dioxide Centrifugal Compressor

Numerical Investigation of Different Heat Transfer Behaviors of Supercritical CO2 in a Large Vertical Tube