Effects of Injection Pressure on Combustion Characteristics of Diesel Fuel in Air and Premixed Methane/Air Mixture Atmosphere

Jiangtao Hu,Chunde Yao,Peilin Geng,Zenghui Yin,Defu Zhang,Ming Ma
DOI: https://doi.org/10.16236/j.cnki.nrjxb.201704041
2017-01-01
Abstract:Experiments about the ignition and combustion processes and soot formation characteristic of diesel fuel in air atmosphere (AA) and premixed methane/air mixture atmosphere (MAA) respectively,were conducted in an optical constant volume combustion chamber at different injection pressures.It is shown that,the test results in AA and MAA have the same change trends:with the increase of injection pressure from 40 to 160 MPa,the ignition delay is short ened from 2.6 ms(AA)and 2.8 ms(MAA)to 2.0 ms and 2.1 ms respectively;and the combustion duration is shortened from 5.2 ms (AA) and 4.9 ms (MAA) to 3.3 ms and 3.2 ms.At high injection pressure,the flame lift-off length becomes longer;the combustion pressure rise rates increase;the moment at which the heat release rate begins to rise is advanced and the peak value also increases;spatially integrated natural luminosity (SINL) and time integrated natu ral luminosity (TINL) are both reduced significantly.However,owing to the addition of methane in MAA,the flame lift-off length becomes longer;the ignition delay is prolonged by 0.18 ms on average;the combustion duration is shortened by 0.15 ms;the moments that both the combustion pressure and the heat release rate begin to rise are de layed;and the peak values of heat release rate in MAA are increased.The SINL and TINL in MAA are both lower than those in AA.
What problem does this paper attempt to address?