Effects of ambient pressure and nozzle diameter on ignition characteristics in diesel spray combustion

Jiun Cai Ong,Jens Honore Walther,Shijie Xu,Shenghui Zhong,Xue-Song Bai,Kar Mun Pang

DOI: https://doi.org/10.1016/j.fuel.2020.119887

IF: 7.4

2021-04-01

Fuel

Abstract:<p>Numerical simulations are performed to investigate the effects of ambient density (<span class="math"><math>ρam</math></span>) and nozzle diameter (<span class="math"><math>Dnoz</math></span>) on the ignition characteristic of diesel spray combustion under engine-like conditions. A total of nine cases which consist of different <span class="math"><math>ρam</math></span> of 14.8, 30.0, and 58.5 kg/m³ and different <span class="math"><math>Dnoz</math></span> of 100, 180, and 363 <span class="math"><math>μ</math></span>m are considered. The results show that the predicted ignition delay times are in good agreement with measurements. The current results show that the mixture at the spray central region becomes more fuel-rich as <span class="math"><math>Dnoz</math></span> increases. This leads to a shift in the high-temperature ignition location from the spray tip towards the spray periphery as <span class="math"><math>Dnoz</math></span> increases at <span class="math"><math>ρam</math></span> of 14.8 kg/m³. At higher <span class="math"><math>ρam</math></span> of 30.0 and 58.5 kg/m³, the ignition locations for all <span class="math"><math>Dnoz</math></span> cases occur at the spray periphery due to shorter ignition timing and the overly fuel-rich spray central region. The numerical results show that the first ignition location during the high-temperature ignition occurs at the fuel-rich region at <span class="math"><math>ρam⩽30.0</math></span> kg/m³ across different <span class="math"><math>Dnoz</math></span>. At <span class="math"><math>ρam=58.5</math></span> kg/m³, the ignition occurs at the fuel-lean region for the 100 and 180 <span class="math"><math>μ</math></span>m cases, but at the fuel-rich region for the 363 <span class="math"><math>μ</math></span>m nozzle case. This distinctive difference in the result at 58.5 kg/m³ is likely due to the relatively longer ignition delay time in the 363 <span class="math"><math>μ</math></span>m nozzle case. Furthermore, the longer ignition delay time as <span class="math"><math>Dnoz</math></span> increases can be related to the higher local scalar dissipation rate in the large nozzle case.</p>

energy & fuels,engineering, chemical