Abstract:Selective catalytic reduction (SCR) systems are important technical means of mitigating NOx emissions for diesel engines. The major challenge of this technique is to improve the low-temperature activity of the catalyst during engine cold start and the thermal stability on repeated exposure to high-temperature exhaust. A two-stage SCR system with a Cu-SSZ-13 catalyst was analyzed with SCR sample experiments and NH3 oxidation experiments. The effects of copper content, doping metals, structural arrangement, NO2/NOx ratio, and NH3/NOx ratio (ANR) on the NOx conversion reaction at different temperatures were investigated. Furthermore, the Cu-SSZ-13 catalyst activity was characterized by Fourier transform infrared spectroscopy, H2 temperature-programmed reduction, and X-ray diffraction. The results showed that the low-temperature catalytic performance first increased with increasing copper content and decreased with a further increase. The optimal value of copper content was around 3.4%. The thermal stability of Cu-SSZ-13 catalysts decreased with the increase in the copper content. The temperature window of the high NOx conversion rate was widened by doping Zr/Mn/Ce, and the temperature window was widened by 15.1–33.1%. The two-stage SCR system was compared with a single SCR, which showed that the NH3 oxidation rate increased by 46.9–88.7%, the NOx conversion rate increased by 67.7–85.5%, and T90 was optimized by 3.3–13.5% during engine cold start. This made the total NOx conversion rate to maintain a high level above 80% at temperatures over 500 °C. An appropriate NO2/NOx ratio and ANR could improve the NOx conversion rate at a low-temperature range.

Reduction of Nitrogen Oxides by a Selective Catalyst in a Lean-Burn Gasoline Engine

Selective Catalytic Reduction of NOx by Hydrocarbons over Copper-Free Metal Supported Zeolite

NOx Reduction Characteristics of Pt-ZSM-5 Catalyst with Diesel Engine Exhaust

Selective Catalytic Reduction of NO X from Exhaust of Lean-Burn Engine over Ag-Al 2 O 3 /cordierite Catalyst

Hc, Co and Nox Emissions Reduction Efficiency of A Prototype Catalyst in Gasoline Bi-Mode Si/Hcci Engine

Effects of Catalyst Physicochemical Properties on the Catalytic Activity of Cu Zeolite Selective Catalytic Reduction at Different Inlet Gas Conditions

Triggers for cardiac events in patients with type 2 long QT syndrome.

Selective Catalytic Reduction of NO over Mo/ZSM-5 Catalyst

Cu/Fe-UZM-35 Catalysts for NOx Abatement in Diesel Vehicles for Next-Stage Emission Standards

Selective Catalytic Reduction of NO_x on Ag/Al_2O_3 Catalyst in Lean-Burn Gasoline Engines

Effect of addition of Zn on the catalytic activity of a Co/HZSM-5 catalyst for the SCR of NOx with CH4

Lean NOx reduction over Sn1−xZrxO2 solid solutions

Self-synthesis and performance analysis of a Cu-Fe composite ZSM-5 zeolitic catalyst for NOx reduction and particulate matter removal using NH3 SCR

Toward rational design of a novel hierarchical porous Cu-SSZ-13 catalyst with boosted low-temperature NO reduction performance

On the selectively catalytic reduction of NOx with methane over Ag-ZSM-5 catalysts

Catalytic performance of Ag/Al2O3-C2H5OH-Cu/Al2O3 system for the removal of NOx from diesel engine exhaust.

Enhancement of nitric oxide reduction via CeZrOx/Cu‐SSZ‐39 hybrid catalyst: Improving activity and hydrothermal stability

Bifunctional Catalyst of CuMn-HZSM-5 for Selective Catalytic Reduction of NO and CO Oxidation under Oxygen Atmosphere

Molybdenum loaded on HZSM-5: A catalyst for selective catalytic reduction of nitrogen oxides

The study on the capacity of NOx storage-reduction catalyst for lean-burn engine

Hybrid Cu-Fe/ZSM-5 Catalyst Prepared by Liquid Ion-Exchange for NOx Removal by NH3-SCR Process