Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

Finite-control-set model predictive control for offshore wind power integration

Data-Enabled Finite Control-Set Model Predictive Control of a Grid-Tied Inverter

Fault-Tolerant Three-Vector Model-Predictive-Control-Based Grid-Connected Control Strategy for Offshore Wind Farms

Virtual Voltage Vector-Based Sequential Model-Free Predictive Control for Multiparalleled NPC Inverters

Finite‐control‐set Model Predictive Control with a Constant Switching Frequency for Single‐phase Grid‐connected Photovoltaic Inverter

A Survey on Model Predictive Control of DFIGs in Wind Energy Conversion Systems

Model Predictive Control-Based Coordinated Control Algorithm with a Hybrid Energy Storage System to Smooth Wind Power Fluctuations

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

A Fuzzy Approximation for FCS-MPC in Power Converters

A Novel Control Strategy For Offshore Dfig-Based Wind Farm Integrated Through Diode-Rectifier-Based Hvdc Transmission

Model Predictive Control Based Coordinated Voltage Control for Offshore Radial DC-connected Wind Farms

Data-Driven Finite Control-Set Model Predictive Control for Modular Multilevel Converter

A Novel Simplified Finite Control Set Repeat-Model Predictive Control for Grid-Connected Inverters

Model Predictive Control with Finite Control Set for Variable-Speed Wind Turbines

Finite Control Set Model Predictive Control with Feedback Correction for Power Converters

Predictive Direct Power Control Strategy for Offshore Wind Power VSC-HVDC Converter

Model Predictive Control of Grid Forming Converters with Enhanced Power Quality

DPC-based control strategy of VSC-HVDC converter for offshore wind farm

Coordinated Control of DC Grid and Offshore Wind Farms to Improve Rotor-Angle Stability

A novel two-stage model predictive control for wind power smoothing based on HESS

Model Predictive Control- Based Wind Farm Power Control with Energy Storage