Abstract:In recent years, Rotary Detonation Engine (RDE) has attracted more and more attention because of their higher combustion efficiency than conventional aerospace engines. For the key problems, ignition technique is particularly important. In order to establish a steady rotating detonation wave under one single ignition in a combustion chamber, a method based on controlling initial fuel distribution is proposed to start a rotating detonation engine under 0.4 MPa injection total pressure using hydrogen/air mixture as its propellant. Two-dimensional reactive Navier-Stokes equation coupled with the Arrhenius kinetic model and κ-ε model are used to simulate detonation process. Elementary chemical reaction model with 9 species 27 reversible reactions is applied to describe the evolution of reaction components. The finite volume method is conducted, and flux terms are solved by using the monotonic upstream-centered scheme for conservation laws, and the time integration is performed by using Euler method. Grid numbers are 600 (azimuthal direction) ×200 (axial direction), with mesh size of about 0.5 mm. Initial fuel filling rate (ϕ) is used to quantify the initial fuel distribution. The numerical study on the propagation characteristics of rotating detonation wave shows that the initial fuel filling rate is the key to the establishment of rotary detonation wave. This effect is particularly evident when the fuel injection pressure is low, which determines the height of the fuel layer(hf) for the first cycle of detonation wave development. When RDE operating steadily, hf is a function of the mixture sensitivity to detonation. But in initial stage, hf is affected by the fuel distribution and this affection can last more than one period. Once detonation wave or deflagration wave formed, it can either maintain rotating or die down, which is determined by the height of mixture layer ahead of it. Thus, keeping hf in an appropriate range by adjusting the initial fuel filling rate is the key to establish and maintain a rotating detonation wave in initial stage. Also, in this stage DW faces maximum possibility of extinguish. Based on this strategy, a rotating detonation wave is established successfully in combustion chamber with diameter of 95.5 mm and the length of chamber is 100 mm. The computed results give the rotating detonation wave has a velocity of 1 604 m/s and operational frequency is 5347.6 Hz. Furthermore, there are four operation modes of the engine due to different initial fuel filling rate, which are failed initiation of the detonation (0%−13.3%), stable rotating detonation (13.3%−20%), unstable detonation (20%−26.6%) and dying detonation (26.7%−100%). So the critical range of the initial fuel filling rate for steady rotating detonation is obtained. Moreover, the initial fuel distribution also influences the delay time of fuel deflagration to detonation transition.

The Method to Compute and Analyze the Performance of the Pulse Detonation Engine

Analysis of Effects of Filling Coefficients on Pulse Detonation Engine Performance

Direct-connected Experimental Investigation on a Pulse Detonation Engine

Review on the Rotating Detonation Engine and It’s Typical Problems

Comprehensive Performance Analysis for the Rotating Detonation-Based Turboshaft Engine

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Performance analysis of pulse detonation ramjet

Experimental Investigations on Detonability Limits of Pulse Detonation Rocket Engine

Numerical Investigation of Flow Particle Paths and Thermodynamic Performance of Continuously Rotating Detonation Engines

Theoretical and Numerical Investigation on Total Pressure Gain in Rotating Detonation Engine

One Inducing Factor of the Operational Mode Transition in A Rotating Detonation Engine

Experimental Investigation on Thrust Augmentation of Pulsed Detonation Engine(PDE)

Primary investigation on Ram-Rotor Detonation Engine

Analysis on Propulsive Performance of Hollow Rotating Detonation Engine with Laval Nozzle

Rotating Detonation Engine Injection Velocity Limit And Nozzle Effects On Its Propulsion Performance

An Investigation on the Wave Multiplicity and Control of Operating Modes in the Hydrogen-Fueled Rotating Detonation Engine

Multi-Rate Digital Control for Pulse Detonation Engine Control Applications

Numerical Studies of Pre-Detonator Ignition of Pulse Detonation Engine

The Influence of Plug Nozzle and Laval Nozzle on the Flow Field and Performance of Non-Premixed Rotating Detonation Combustor

Method based on controlling initial fuel distribution to establish stable rotating detonation wave in combustion chamber