Abstract:HCCI combustion was studied in a 4-stroke gasoline engine with a direct injection system. The electronically controlled two-stage gasoline injection and spark ignition system were adopted to control the mixture formation, ignition timing and combustion rate in HCCI engine. The engine could be operated in HCCI combustion mode in a range of load from 1 to 5 bar IMEP and operated in SI combustion mode up to load of 8 bar IMEP. The HCCI combustion characteristics were investigated under different A/F ratios, engine speeds, starts of injection, as well as spark ignition enabled or not. The test results reveal the HCCI combustion features as a high-pressure gradient after ignition and has advantages in high thermal efficiency and low NOx emissions over SI combustion. At the part load of 1400rpm and IMEP of 3.5bar, ISFC in HCCI mode is 25% lower and NOx emissions is 95% lower than that in SI mode. By introducing the second fuel injection in compression stroke, the stratified concentration is formed and the mixture is cooled, which means that HCCI ignition timing can be controlled and the load range can be extended by tuning mixture concentration and temperature. At critical ignition temperature, especially in SI/HCCI combustion mode transition, assisted spark ignition improves the stability of HCCI combustion. To better understand the physicochemical process within the cylinder, direct photographs on an optical engine using CCD camera had been used to analysis the intake, two-stage spray, compression and combustion process of the HCCI engine. The captured photographs show homogeneous lean charge could be realized by single fuel injection in intake stroke. Due to the intake swirl and squish flow during the compression stroke, the rich mixture formed by 2nd fuel spray are located near the spark. A great amount of spots are ignited simultaneously in fuel-rich zone, then it worked as an initiation to ignite the surrounding lean mixture zone. In this combustion system, a high intake swirl can be kept in the toroidal combustion chamber promoting fuel dispersion to reduce NOx emissions. Copyright © 2005 SAE International.

Combustion and Emission Characteristics of DISI Engine During Direct Start

Study on the Combustion and Hydrocarbon Emission Characteristics of Direct Injection Spark-Ignition Engines During the Direct-Start Process

Effects of Multiple Injections on the Combustion and Hydrocarbon Emission Characteristics of the Start Cylinder in Direct-Start Process

Experimental Investigation of the Evaporation Characteristics of the Fuel in a Direct-Injection Spark Ignition Engine Subjected to a Direct-Start Process

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Experimental Study on Stratified and Homogeneous Combustion of a Methanol Direct-Injection Spark-Ignition Engine

Effect of Split Injection Timing on Combustion and Emissions of a DISI Optical Engine under Lean Burn Condition

(3-03) Feasibility of CNG DI Stratified Combustion Using a Spark-Ignited Rapid Compression Machine((AF-1)Alternative Fuels 1-Gas Engines)

Experimental investigation on the combustion and emissions in a pilot ignited direct injection natural gas engine using HCDI strategy

Combustion and Emissions of A Direct-Injection Diesel Engine During Cold Start under Different Exhaust Valve Closing Timing Conditions

Effects Of Injection Timing Of Dme On Micro Flame Ignition (Mfi) Combustion In A Gasoline Engine

Numerical simulation of mixture formation and combustion of gasoline engines with multi-stage Direct Injection Compression Ignition (DICI)

Experimental Investigation on Combustion and Emissions of a Two-Stroke DISI Engine Fueled with Aviation Kerosene at Various Compression Ratios

Study of Multimode Combustion System with Gasoline Direct Injection

Effect of Split Injection on Stratified Charge Formation of Direct Injection Spark Ignition Engines

Effects of spark ignition and stratified charge on gasoline HCCI combustion with direct injection

Effects of Injection Timing and Compression Ratio on the Combustion Performance and Emissions of a Two-Stroke DISI Engine Fuelled with Aviation Kerosene

Experimental Study on the Diesel Injection Pressure of Homogeneous Charge Induced Ignition for Multi-cylinder Operation

Impact of Flash Boiling Multiple Injections Timing on the Combustion and Thermal Efficiency of a Gasoline Direct Injection Engine under Lean-Burn

Particulate Emission and Combustion Characteristics of a Direct-Injection Natural Gas Engine under Various Injection and Ignition Timings