Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Recycling and Reuse the Li4Ti5O12 Anode Material of Lithium-ion Battery through an Organic Solvent Immersion Method

Facile Fabrication of High-Performance Li-Ion Battery Carbonaceous Anode from Li-Ion Battery Waste

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Using and Recycling V2O5 As High Performance Anode Materials for Sustainable Lithium Ion Battery

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Li4Ti5O12 Spinel Anode: Fundamentals and Advances in Rechargeable Batteries

Efficient Extraction of Lithium from Anode for Direct Regeneration of Cathode Materials of Spent Li-Ion Batteries

Investigation on process mechanism of a novel energy-saving synthesis for high performance Li4Ti5O12 anode material

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

High Performance Ti3+ Self-Doped Li4Ti5O12 Anode Materials Synthesized by an Electrochemical Method in Molten Salt

An Effective Relithiation Process for Recycling Lithium‐Ion Battery Cathode Materials

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries

Organic acid-assisted vapor phase reduction for high-dense defects of retired graphite for high-performance lithium-ion batteries

Improved Electrochemical Properties of Li 4 Ti 5 O 12 Nanopowders (NPs) via Addition of LiAlO 2 and Li 6 SiON Polymer Electrolytes, Derived from Agricultural Waste

Utilization of Si/SiOx/Al2O3 material from recycled solar cells for high-performance lithium-ion battery anode

Monodispersed mesoporous Li4Ti5O12 submicrospheres as anode materials for lithium-ion batteries: morphology and electrochemical performances.

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

A green and sustainable strategy toward lithium resources recycling from spent batteries

Sustainable Recycling of Cathode Scrap towards High‐Performance Anode Materials for Li‐Ion Batteries

A Facile Surface Reconstruction Mechanism Toward Better Electrochemical Performance of Li4Ti5O12 in Lithium-Ion Battery.

TiO2 Recovered from Spent Selective Catalytic Reduction Catalysts As Anode Material for Lithium-Ion Batteries