Abstract:To achieve the high dispersion of SiO2 nanoparticles in polyurethane acrylate resin, the titanate coupling agent, PN-102, was used as the surface modifier to prepare the modified SiO2 nanoparticles (Si-PN102-5) with small particle size and good dispersion ability in PUA-6 resin. Accordingly, hydrophilic SiO2 (Si-380) and hydrophobic SiO2 (Si-115) were introduced into PUA-6 resin to prepare the corresponding composite coatings, so as to investigate the effects of SiO2 nanoparticles modified with different surface modifiers on the properties of PUA / SiO2 composite coatings. The properties of PUA / SiO2 composite coatings were characterized by the tests of FTIR, AFM, SEM, DMA, TG and so on. The FT-IR and XPS results show that PN-102 had functionalized the SiPN102-5 particle surface successfully. The TEM test displays that the particle size of SiO2 was almost unchanged before and after modification, maintaining at about 20-30 nm. The SEM, DMA and tensile test reveal that Si-PN102-5 not only blocks the interaction and accumulation of nanoparticles, but also enhances the interface interaction with polymer chains through chain entanglement, which endows Si-PN102-5-5% composite coatings with highest mechanical strength among the other prepared coatings, reaching to 11.0 +/- 0.1 MPa in tensile strength and 9.4 +/- 3.0% in elongation at break. The pencil hardness of the prepared Si-PN102-5-5% composite coating could reach to 5H which is higher than the commercial PUA-6 based coating, and it also displayed good adhesion (4B) and flexibility (3 mm). The TG results show that all of prepared composite coatings display good thermal stability with a decomposition temperature of higher than 250 degrees C.

Preparation of polyacrylate/nano-SiO2composite emulsion by Pickering emulsion polymerization and its potential application in coating materials

Study on Silicone Modified Polyurethane-Acrylate Copolymer Emulstion

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

The synthesis of silica-polyacrylate nano-complex coating

Mini-Emulsification and Mini-Emulsion Polymerization of Methyl Methacrylate/Nanosilica Dipsersion

PERSISTENT HYPERINSULINAEMIC HYPOGLYCAEMIA OF INFANCY: LONG‐TERM TREATMENT WITH THE SOMATOSTATIN ANALOGUE SANDOSTATIN †

Synthesis of Emulsion of Water-Based Nano Silicon Oxide-Polyacrylic Ester

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Preparation of Polyacrylate Emulsion with High Adhesion Properties by Adding Modified Silica Sol

Progress on Synthesizing SiO_2/Polymer Nanocomposite Emulsion

Pickering Emulsion Approach for Fabrication of Waterborne Cross-Linkable Polydimethylsiloxane Coatings with High Mechanical Performance

Preparation and characterization of polyacrylate composite and its application in superhydrophobic coating based on silicone-modified ZnO

Preparation and Characterization of Acrylate/Nano-SiO2 Compound Emulsion

Preparation and Properties of UV-curable Polyurethane Acrylate/sio2 Composite Hard Coatings

Facile fabrication of superhydrophilic poly(styrene-co-acrylate)/SiO2 composite materials by conventional emulsion polymerization

The Preparation and Characterization of Aqueous Nanosilica/Polyester Composite Resin and Coatings

Film Formation Behavior and Mechanical Properties of One-Component Waterborne Crosslinkable Polysiloxane/fumed Silica Nanocomposite Coatings

Effect of Hydrophobically Modified Nano-silica Particles on the Properties of High Solid Acrylic Based Polyurethane Coatings

The Properties of High Solid Acrylic Based Polyurethane and Acrylic Latex Embedded with Nano-Silica

Synthesis and Characterization of Waterborne Polysiloxane-Polyacrylates Dispersion