Abstract:A compact broadband substrate integrated waveguide (SIW) six-port junction based on a novel topology and its application in angle-of-arrival (AoA) finding system are proposed in this article. The miniaturization design philosophy of the six-port junction is based on the change of the conventional topology rather than the special structure of the discrete component or the advantage of the fabrication technology. The proposed six-port junction is constructed by two multistep -plane Hybrid couplers, one complementary split-ring resonator (CSRR) loaded wideband 90° phase shifter, two power dividers, and two extra phase shifters of arbitrary phase. The additional phase differences introduced by the extra phase shifters do not deteriorate the application performance based on the -parameters requirement of the six-port junction design. The power divider and the adjacent extra phase shifter are realized by one -plane 3-dB coupler (3dB-C) with one port short by metalized holes. The combination of - and -plane coupler significantly reduces the volume of the entire six-port junction. The fabrication of the prototype is measured by a commercial vector network analyzer and shows a good agreement with the simulation results. The fractional working bandwidth is 32.2% at 7.15 GHz and more than 20% volume is reduced compared with other designs with comparable bandwidth. Besides, to directly verify the availability of the novel topology, a simplified six-port AoA finding system utilized the proposed six-port junction is realized. The maximum average erro- of the measured incident angle in the entire bandwidth is no larger than 1.65°, which is comparable to the traditional system. However, it is worth to be noted that the proposed structure can make a considerable reduction of volume and can be utilized widely for the miniaturization design of the six-port measurement systems.

Design of miniaturized microwave six-port junction using shunt-stub-based meander line

Design of an Ultracompact MMI Wavelength Demultiplexer in Slot Waveguide Structures.

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

Miniaturised dual-band rat-race coupler based on double-sided parallel stripline

A Six-Port Circulator Based on Multimode Interference

A miniaturized broadband four-port antenna located on a cylindrical conductor

A Novel Compact Broadband SIW Six-Port Junction for Angle-of-Arrival Applications

Vertical Topologies of Miniature Multispiral Stacked Inductors

Design of a Low-Insertion-phase-shift MMIC Attenuator Integrated with a Serial-to-parallel Converter

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

A Compact Meander Line-Resonator Hybrid Structure for Wideband Common-Mode Suppression

Design of High-Isolation Diplexer Based on Microstrip Coupled Lines

Three-port Mode-(De)interleaver in Silicon Waveguide

On-Chip Impedance-Optimized Microstrip Transmission Line For Multi-Band And Ultra-Wide-Band Microwave Applications

High Quality Factor Miniaturized CMOS Transmission Lines Using Cascaded T-Networks for 60 GHz Millimeter Wave Applications

A compact diplexer using meander-line resonators and a new coupled junction for 5G and WiMAX application

A miniature TSV-based branch line coupler using π equivalent circuit model for transmission line

U-Shaped Meander-Line Slow-Wave Structure with Stub-Loading

Three-Dimensional Interconnection With Magnetically Coupled Transition for W-Band Integration Applications

A MINIATURIZED BRANCH-LINE COUPLER WITH WIDEBAND HARMONICS SUPPRESSION

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements