Abstract:The global trend in restrictions on pollutant emissions requires the use of catalytic converters in the automotive industry. Noble metals belonging to the platinum group metals (PGMs, platinum, palladium, and rhodium) are currently used for autocatalysts. However, recent efforts focus on the development of new catalytic converters that combine high activity and reduced cost, attracting the interest of the automotive industry. Among them, the partial substitution of PGMs by abundant non-PGMs (transition metals such as copper) seems to be a promising alternative. The PROMETHEUS catalyst (PROM100) is a polymetallic nanosized copper-based catalyst for automotives prepared by a wet impregnation method, using as a carrier an inorganic mixed oxide (CeO2-ZrO2) exhibiting elevated oxygen storage capacity. On the other hand, catalyst deactivation or ageing is defined as the process in which the structure and state of the catalyst change, leading to the loss of the catalyst's active sites with a subsequent decrease in the catalyst's performance, significantly affecting the emissions of the catalyst. The main scope of this research is to investigate in detail the effect of ageing on this low-cost, effective catalyst. To that end, a detailed characterization has been performed with a train of methods, such as SEM, Raman, XRD, XRF, BET and XPS, to both ceria-zirconia mixed inorganic oxide support (CZ-fresh and -aged) and to the copper-based catalyst (PROM100-fresh and -aged), revealing the impact of ageing on catalytic efficiency. It was found that ageing affects the Ce-Zr mixed oxide structure by initiating the formation of distinct ZrO2 and CeO2 structures monitored by Raman and XRD. In addition, it crucially affects the morphology of the sample by reducing the surface area by a factor of nearly two orders of magnitude and increasing particle size as indicated by BET and SEM due to sintering. Finally, the Pd concentration was found to be considerably reduced from the material's surface as suggested by XPS data. The above-mentioned alterations observed after ageing increased the light-off temperatures by more than 175 °C, compared to the fresh sample, without affecting the overall efficiency of the catalyst for CO and CH4 oxidation reactions. Metal particle and CeZr carrier sintering, washcoat loss as well as partial metal encapsulation by Cu and/or CeZrO4 are identified as the main causes for the deactivation after hydrothermal ageing.

Research on Performance of Complex Catalyst of Noble Metal-Rare Earth

On preparation of noble metal-rare earth compounds and their performance as a complex catalyst

Research progress on the preparation of transition metal-modified zeolite catalysts and their catalytic performance for the purification of engine exhausts

In-situ Formed Stable Pt Nanoclusters on Ceria-Zirconia Solid Solutions Induced by Hydrothermal Aging for Efficient Low-Temperature CO Oxidation

Influence of Ceria-Zirconia Solid Solution on Performance of Noble Metal Monolithic Oxidation Catalyst

High Catalytic Efficiency of a Nanosized Copper-Based Catalyst for Automotives: A Physicochemical Characterization

Research Progress on High-Performance Noble Metal/cerium Oxide Nanocatalysts: Shape Controlled Synthesis, Performance Regulation and Applications

Current Application of Rare-Earth in Catalyst for Cleaning the Automotive Off-Gas

Light‐Off Performance of Three‐Way Catalysts Before and After Accelerated Aging Test with Engine‐Dynamometer

Investigation on properties of Pd/CeO2-ZrO2-Pr2O3 catalysts with different Ce/Zr molar ratios and its application for automotive emission control

PM-support Interfacial Effect and Oxygen Mobility in Pt,Pd or Rh-loaded (ce,zr,la)o2 Catalysts

Preparation, Structure and Catalytic Performances of Rare Earth Catalytic Materials

Carbon Monoxide and Propylene Catalytic Oxidation Activity of Noble Metals (M = Pt, Pd, Ag, and Au) Loaded on the Surface of Ce0.875Zr0.125O2 (110)

Application Of Rare Earth Modified Zr-Based Ceria-Zirconia Solid Solution In Three-Way Catalyst For Automotive Emission Control

Enhancing catalytic converter performance: effects of noble metals and rare earth washcoating on CO and NOx conversion

Preparation, characterization and catalytic properties of Pd-Fe-zeolite and Pd-Ce-zeolite composite catalysts

Study on Preparation and Performance of NO Catalytic Oxidation Catalyst

Surface Defect Engineering on Constructing High-Performance Noble Metal Active Sites: A Simple and Cost-Effective Path to High-Performance Oxidation Catalysts

DeNOx Performance and Characteristic Study for Transition Metals Doped Iron Based Catalysts

Research progress on the preparation of alkali/alkaline earth metal-modified metal oxide catalysts and their application to diesel engine exhaust soot particle catalytic purification

Nitric oxide reduction performance of automotive palladium catalysis