Optimization of solar-air source heat pump heating system with phase change heat storage
Xiangfei Kong,Yingshan Liu,Han Li,Man Fan,Weixue Cao
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122897
IF: 6.4
2024-03-14
Applied Thermal Engineering
Abstract:The optimization of heating system has always been of much concern, among which the annual life cycle cost (ALCC) was widely used as an optimization method, while the non-guaranteed hours were often overlooked. This study proposed the elasticity-economy (E-E) objective function as an optimizing indicator, and demonstrated it taking a solar assisted heat pump heating system with phase change material (SC-ASHP-PCM) as an example. Firstly, the single variation impact was analyzed. After optimizing the thermal performance of sub-systems, the proportion of heat supplied by solar collector (SC) and phase change material (PCM) sub-systems increased by 5.4 % and 3.4 %, respectively. Subsequently, the Hooke-Jeeves algorithm was developed to optimize multi-factors, hence minimizing the E-E objective function. The optimal solution was achieved when the non-guaranteed rate was 5 % and the penalty factor was 150 CNY/h. Compared with the baseline situation, the system energy consumption (156.8 × 10 3 kW‧h) was reduced by 30 %, and the E-E objective function was reduced by 24 %. Furthermore, the minimum operating cost was 18.3 CNY/m 2 , saving up to 46 % compared to traditional heating systems. The method is generalized to obtain the optimal energy saving potential under different non-guaranteed hours, which provides guidance for the heating systems' design and operation.
energy & fuels,engineering, mechanical,thermodynamics,mechanics