Abstract:Modern low-level RF (LLRF) control systems of particle accelerators are designed to achieve extremely precise field amplitude and phase regulation inside the accelerating cavities, the RF field signal is usually converted to an intermediate frequency (IF) before being sampled by ADC. As the down-conversion is an important procedure of the digital signal processing in LLRF system, designing a high performance and broad band downconverter compatible with various accelerators will be significant. In this paper, the design of a MicroTCA based downconverter is presented, the major design objective of this module is wider operating frequency range and more flexibility in application. Several performance evaluations on different frequency points of this module have been conducted and the module presents a good performance in the operating frequency range. INTRODUCTION Modern accelerator facilities require precisely controlled radio frequency (RF) fields for beam acceleration. The field parameter control is performed by a low-level radio frequency (LLRF) control system, which should ensure the regulation accuracy is typically better than 1% for the amplitude stability and 1° for the phase stability. The new generation accelerators need much higher RF field accuracy and stability in cavity. Accelerators such as the Europe X-ray Free Electron Laser (XFEL) and 3 GeV Energy Recovery Linac (ERL) require an accuracy up to 0.01% and 0.01°[1]. These high performance requirements bring great challenges to the LLRF system. The RF front-end is an important part in LLRF system. The primary function of the front-end is to down convert the signal from the cavity to the intermediate frequency, and the performance of it will directly influence the accuracy of the LLRF system. To meet the growing requirements of regulation accuracy in accelerators, we have designed a multi-channel broadband downconverter module based on MicroTCA.4 standards. The MicroTCA is a new standard which offers better stability, modularity and maintainability compared to traditional hardware standard. This standard has been widely adopted in many recent accelerators, include the ADS Injector I project [2]. DESIGN OF THE DOWNCONVERTER

Front-end frequency conversion module design for harmonic RF system in SSRF

Tuning control system of a third harmonic superconducting cavity in the Shanghai Synchrotron Radiation Facility

Photonic Down-Conversion and Linearisation with Tunable IF Bandwidth and Improved Spurious-Free Dynamic Range

Design and implementation of high performance frequency synthesizer for SSRF

Digital phase control system for ssrf linac

Low level radio frequency controller for superconducting third harmonic cavity at SSRF

Beam Instrumentation System Optimization for Top-up Operation in SSRF

Design of rf front end for cavity beam position monitor based on ics *

Digital LLRF Controller for SSRF Booster RF System Upgrade

Design and evaluation of a broad band based downconverter

Research on Longitudinal Dynamics and Design of RF Parameters of Synchrotron for XiPAF-upgrading Project

Development of dual-harmonic RF system for CSNS-II

Design and performance of LLRF system for CSNS/RCS

Development of a digital low-level RF system for the STCF

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

Design and implementation of frequency tracking and amplitude-phase feedback in RFQ low level control system

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

Bunch-by-bunch Beam Transverse Feedback Electronics Designed for SSRF

Design and Testing of a Bunch-by-bunch Beam Position Transverse Feedback Processor

The Low Level Radio Frequency Control System for DC-SRF Photo-Injector at Peking University

Multi-physics Field Coupling Analysis of RFQ Cavity for SSC-LINAC