A viscoelastic vibration reduction method of optical-elements for synchrotron radiation

Gang CAO,Yi LI,Hao LIANG,Weifan SHENG
DOI: https://doi.org/10.11889/j.0253-3219.2019.hjs.42.120101
2019-01-01
Nuclear Techniques
Abstract:[Background] Vibration instability of optical-elements caused by ground micro-vibrations affects the position and focal length of the sample in the synchrotron beamline. [Purpose] This study aims to propose a scheme of employing viscoelastic dampers on beamline optical-elements for vibration reduction. [Methods] First of all, a viscoelastic damper was designed, and the coefficients of Prony series were obtained by nonlinear fitting of shear storage modulus and loss modulus of the viscoelastic materials by shared-parameters mode. Then, the dynamic properties of viscoelastic dampers were simulated by finite element software. Finally, this damper was applied to a long reflecting-mirror, and the harmonic response, transient dynamic analysis, and the static structural analysis of the supporting structure were carried out. In addition, the influence of the installation position of dampers on the damping effect were compared. [Results] Simulation results show that for the 1 mm vertical steady-state sweep excitation, the vertical displacement transmissibility of the mirror decreased by 35.2% (original position), 53.7% (closer to the edges), 32.4% (closer to the center) in the frequency range of 0~200 Hz, respectively. For the 1 μm vertical half-sine shock excitation with duration of 6.25 μs, the RMS values of 0.5 s after impact interference decreased by 70.8% (original position), 79% (closer to the edges), 59.7% (closer to the center), respectively. [Conclusions] The proposed viscoelastic damper can effectively reduce the influence of ground induced micro-vibrations on the mirror, and provide some guidelines for the vibration stability study of other optical-elements in synchrotron beamlines.
What problem does this paper attempt to address?