Abstract:With the rapid development of high-performance computers, high-precision, multi-scale and multi-physics coupling has become one of the main research contents of nuclear energy. The coupling of neutronics and thermal-hydraulics is the basis of the multi-physics coupling; the core power and temperature distribution interact and couple with each other until the steady state is reached. Prismatic high-temperature gas-cooled reactor is one of the Generation IV nuclear reactors, which has advantages of inherent safety, high power generation efficiency and nuclear hydrogen production. This paper has developed the neutronics and thermal-fluid coupling code PHEASANT for the prismatic high-temperature gas-cooled reactor, based on the open-source multi-physics coupling platform MOOSE. PHEASANT code is applied to the MHTGR-350MW benchmark for steady-state coupling. In PHEASANT, the 3D neutronics and thermal-fluid module are developed firstly, and the “Multiapp” function suitable for steady-state coupling is also developed that realizes the Picard iteration of two modules. In addition, the “Transfer” function of the MOOSE platform is adopted to achieve the data transfer between two modules by memory. The developed PHEASANT code is applied to the MHTGR-350MW benchmark coupling, and the multi-state group constants are generated by the Monte Carlo code RMC. Results show that the axial power peak factor increases from 1.26 to 1.70, and the corresponding position of the peak value is upward. Moreover, the core’s upper part power is higher because of the lower core temperature; also, lower temperature of the lower part is due to the higher core temperature. After coupling, the inlet and outlet temperature of the coolant are unchanged, while the average temperature increases. Meanwhile, the maximum temperature of fuel and graphite decrease 39.64 °C and 35.29 °C respectively, but the average temperature increases 67.4 °C. Therefore, calculation results demonstrate that the steady-state coupling has a significant impact on the core power and temperature distribution, which proves the necessity of the neutronics and thermal-fluid coupling.

Coupled Neutronic and Thermal-Hydraulic Analysis of TMSR-SF1 at Steady State

Neutronic and Thermal-Mechanical Coupling Schemes for Heat Pipe Cooled Reactor Designs

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

COUPLE, A Time-Dependent Coupled Neutronics and Thermal-Hydraulics Code, and its Application to MSFR

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

Neutronic and thermal-mechanical coupling analyses in a solid-state reactor using Monte Carlo and finite element methods

Research on Coupling of Neutronics and Thermal-Hydraulics Based on Stochastic Method of Neutron Transport

A new neutronics-thermal-mechanics multi-physics coupling method for heat pipe cooled reactor based on RMC and OpenFOAM

Full-scale Neutronic/thermal–hydraulic Coupling Analysis of Plate-Type Reactor Based on RMC and MOOSE

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

MCS based neutronics/thermal-hydraulics/fuel-performance coupling with CTF and FRAPCON

Multi-physics coupling analysis on neutronics, thermal hydraulic and mechanics characteristics of a nuclear thermal propulsion reactor

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

Rmc/ansys multi-physics coupling solutions for heat pipe cooled reactors analyses

The first-principle coupled calculations using TMCC and CFX for the pin-wise simulation of LWR

Neutronics and thermal-hydraulics coupling analysis using the FLUENT code and the RELAP5-3D code for a molten salt fast reactor

Development and Verification of Multiphysical Coupling Calculation Code for Typical Pressured Water Reactor Core

Coupled Neutron Dynamic and Thermal Hydraulic Models of the HTR Simulator

Coupled Neutronics and Thermal-Fluid Calculation for Prismatic High-Temperature Gas-Cooled Reactor Core at Steady State

NEUTRONIC/THERMAL-HYDRAULIC COUPLING ANALYSIS OF XI'AN PULSED REACTOR BASED ON RMC AND COBRA-TF