Abstract:In this paper, our home-developed lattice code NECP-CACTI has been implemented into our UNICORN code to perform sensitivity and uncertainty analysis for the lattice calculations. The verified multigroup cross-section perturbation model and methods of the sensitivity and uncertainty analysis are established and applied to different lattice codes in UNICORN. As DRAGON5.0 and NECP-CACTI are available for the lattice calculations in UNICORN now, the effects of different neutronics methods (including methods for the neutron-transport and resonance self-shielding calculations) on the results of sensitivity and uncertainty analysis were studied in this paper. Based on NECP-CACTI, uncertainty analysis using the statistical sampling method has been performed to the burnup calculation for the fresh-fueled TMI-1 assembly, propagating the nuclear-data uncertainties to k(infinity) and two-group constants of the lattice calculation with depletions. As results shown, for different neutronics methods, it can be observed that different methods of the neutron-transport calculation introduce no differences to the results of sensitivity and uncertainty analysis, while different methods of the resonance self-shielding calculation would impact the results. With depletions of the TMI-1 assembly, for k(infinity), the relative uncertainty varies between 0.45% and 0.60%; for two-group constants, the largest variation is between 0.35% and 2.56% for v Sigma(f,2). Moreover, the most significant contributors to the uncertainty of k(infinity) and two-group constants varied with depletions are determined. (C) 2016 Elsevier Ltd. All rights reserved.

Burnup information updating and verification based on WIMS-D library

Benchmark Validation of DRAGON Program Using WIMS-D Nuclear Data Library

Comparative Study of WIMS-AECL and MCNP & MCBurn

Applicability Evaluation of the Nuclear Data Libraries for PWR Radioactive Liquid Effluents Calculation

The Consistency Of Wims-D Library And Ace Format Library

Processing and preliminary testing on multi-group data file of pivotal nuclides in thorium-uranium cycle

Validation of Thorium Fuel Benchmark by DRAGON Code Using WLUP Library

Development of MCBurn and its application in the analysis of SCWR physical characteristics

Development of 3d Reactor Burnup Code Based on Monte Carlo Method and Exponential Euler Method

Nuclear-data Uncertainty Propagations in Burnup Calculation for the PWR Assembly

Generation of a group constants library for uranium zirconium hydride reactor and some calculations of core and safety parameters

Evaluation of WIMS-D/4 Unclear Data Library Used on TRIGA Reactor Calculation

ICONE19-43353 DEVELOPMENT AND VALIDATION OF BURNUP FUNCTION IN REACTOR MONTE CARLO RMC

Multi-Group Library Generation For The Study Of Nuclide Transmutation In High Flux Engineering Test Reactor

Development of Burnup Methods and Capabilities in Monte Carlo Code RMC

Impact of nuclear data revised from JENDL-4.0 to JENDL-5 on PWR spent fuel nuclide composition

Development of a MCNP–ORIGEN Burn-Up Calculation Code System and Its Accuracy Assessment

Application of CENDL-3.2 and ENDF/B-VIII.0 on the Reactor Physics Simulation of PWR

Burnup Chain Compression Method Preserving Neutronics, Decay Photon Source Term and Decay Heat Calculation Results

Uncertainty Analysis of Infinite Multiplication Factor and Nuclide Number Density Based on the UAM-PWR Benchmark with Respect to Cross Sections, Fission Yields and Decay Half-Life

Development of Burn-Up Module to Three-Dimension Hexagonal Nodal Method for Fast Reactor